Multiple cylindrical front

Eight-toothed, eight-toothed, semi-coarse-toothed cylindrical end mill Diameter: 63mm Blade length: 210mm Total length: 315 mm Clamping diameter: 63mm with two weldon plates Helix angle 25° (35°) Material: HSSCo8 - High-speed cobalt steel Standard: ČSN 222132.43 / 13504-526D1

Fine-tooth cylindrical end mill Diameter of cutter: 10mm Blade length: 42mm Total length: 100mm Clamping diameter: 10mm Number of blades: 5 Material: HSS - High-speed steel Standard: replacement for ČSN 222138 / production standard Zbrojovka Vsetín

Fine-tooth cylindrical end mill Diameter of cutter: 12mm Blade length: 32mm Total length: 84mm Clamping diameter: 12mm Number of blades: 6 Material: HSS - High-speed steel Standard: replacement for ČSN 222138 / production standard Zbrojovka Vsetín

Fine-tooth cylindrical end mill Diameter of cutter: 14mm Blade length: 45mm Total length: 105mm Clamping diameter: 12mm Number of blades: 6 Material: HSS - High-speed steel Standard: replacement for ČSN 222138 / production standard Zbrojovka Vsetín

Fine-tooth cylindrical end mill Diameter of cutter: 15mm Blade length: 60mm Total length: 110mm Clamping diameter: 15mm Number of blades: 6 Material: HSS - High-speed steel Standard: replacement for ČSN 222138 / production standard Zbrojovka Vsetín

Six-edged, six-toothed, semi-coarse-toothed, right-hand cutting end mill with left-hand helix Diameter: 28.2mm Blade length: 32mm Total length: 140mm Clamping diameter: 30mm, at the end two flats with a width of 16mm, internal thread M16 Material: HSSCo5 - High-speed cobalt steel Standard: custom production

Set of short three-cut grooving machines with item over center(drilling) with weldon face Set contents: 4x7, 5x8, 6x8, 8x11, 10x13, 12x16 mm Tolerance of cutting diameter accuracy: e8 Clamping shanks: 6mm(d4 d5 d6), 10mm(d8 d10), 12mm(d12) Number of bars — itA… —: 3 bA… â „c. Material: HSSCo8(contains 8 packs) Standard: DIN 1835 B, DIN 327 Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Figure 2) Ord. Code: 230418.SET4-12

Needle fileter PJC 140/3 Length: 140 mm Square: 3,5mm Sek: 3 - fine (see enclosed table) Roughness of Files is given by the number of choppers per centimeter of length. Number of teeth according to DIN 8349 Art. number: 28621383 1430

Drill stepped in metal, steel plate, acrylic glass and not. Metal for PG Bushings Range: 6,0 - 26,75mm Clamping Shank: 10mm The drill has the following grades: 6.0 - 9.0 - 11.4 - 14 - 17, 25 - 19 - 21,25 - 26,75 mm Stepped spiral drills Material: HSS

Set of short three-edged milling cutters with cutting edge through the center( drilling) with weldon face 70.3004 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Tolerance of cutting edge accuracy : k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of edges: 3 b. Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions

Set of short three-edged roughing cutters with cutting edge through the center( drilling) with weldon face 70.3006 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Diameter accuracy tolerances cutting edges: k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of cutting edges: 3 cutting edges Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions Type HR: For roughing materials with medium to higher strength, machining Ra 6.3 and coarser.

Set of short four-edged cutters with cutting edge through the center( drilling) with weldon face 70.3008 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Tolerance of cutting edge accuracy : k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of edges: 4 b. Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions