Morse tapping head for TC type adapters , VERTEX
M3-M12 , MT2 |
In stock
(1x)
|
70,85 € with VAT |
M3-M12 , MT3 |
On request
|
75,17 € with VAT |
M3-M12 , MT4 |
In stock
(1x)
|
74,49 € with VAT |
M8-M20 , MK3 |
In stock
(2x)
|
89,96 € with VAT |
M8-M20 , MT4 |
In stock
(1x)
|
83,82 € with VAT |
M14-M33 , MK4 |
In stock
(2x)
|
134,08 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- VERTEX
- Warranty:
- 24 months
Product information
Clamping range of the tap: according to the selected variant
Clamping shank: according to the selected variant
This type (SF) is without length compensation!
The torque coupling is set directly on the attachment.
Tap clamping method:
Taps are clamped in extensions, which need to be purchased separately.
The taps are secured in the extension with a square and a clamping shank.
The tap is held firmly in the extension, pulled out after pressing the clamping collar.
The extensions are secured in the head over a bearing and stones.
In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country.
Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards
Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately!
Usage:
The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.
Variants
Accessories
-
Insert for M24 tap with torque coupling, TC-820-M24-DIN376, 820-29D
DIN 376 (Classic Shank) Clamp Clamp Attachment: : M24 as well as M22 DIN 374 (classic shank): M22x1,5, M221,0, M24x2,0, M24x1,5, M26x1,5 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M22 tap with torque coupling, TC-820-M22-DIN376, 820-28D
DIN 376 (classic shank) : M22 as well as M24 DIN 374 (classic shank): M22x1,5, M221,0, M24x2,0, M24x1,5, M26x1,5 DIN 371 (reinforced stopwatch): --- Length compensation - see enclosed photo Tape clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
On request49,86 € with VAT -
Insert for M10 tap with torque coupling, TC-820-M10-DIN376, 820-22D
DIN 376 (Classical Stopper) : M10 DIN 371 (Reinforced Stopper): --- Length Compensation - See Attached Photo Tapping Method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M8 tap with torque coupling, TC-820-M8-DIN371, 820-03D
DIN 371 (reinforced shank) : M8 DIN 376 (classic shank): Length compensation - see enclosed photo Tapping method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M8 tap with torque coupling, TC-820-M8-DIN376, 820-21D
DIN 376 (Classic Shank) : M8 DIN 371 (reinforced stopper): M5 and M6 Length compensation - see attached photo Tapping method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M14 tap with torque coupling, TC-820-M14-DIN376, 820-24D
DIN 376 (Classical Stopper) : M14 DIN 374 (classical shank): M14x1,5, M14x1,25, M14x1,0 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M12 tap with torque coupling, TC-820-M12-DIN376, 820-23D
DIN 376 (Classic Shank) : M12 DIN 374 (classic shank): M12x1,5, M12x1,25, M12x1,0 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M16 tap with torque coupling, TC-820-M16-DIN376, 820-25D
DIN 376 (Classical Stopper) : M16 DIN 374 (classical shank): M16x1,5, M16x1,25, M16x1,0 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M20 tap with torque coupling, TC-820-M20-DIN376, 820-27D
DIN 376 (Classical Stopper) : M20 DIN 374 (classic shank): M20x2,0, M20x1,5, M20x1,0 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M18 tap with torque coupling, TC-820-M18-DIN376, 820-26D
DIN 376 (classic shank) : M18 DIN 374 (classical shank): M18x1,5, M18x1,25, M18x1,0 DIN 371 (reinforced stopper): --- Length compensation - see enclosed photo Taper clamping method: The taps are secured in the adapter by a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M6 tap with torque coupling, TC-820-M6-DIN371, 820-02D
DIN 371 (Reinforced Stopper) : M6, and also M5 DIN 376 (classic shank): M8 Thread clamping method: Taps they are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT -
Insert for M10 tap with torque coupling, TC-820-M10-DIN371, 820-04D
DIN 371 (reinforced shank) : M10 DIN 376 (classic shank): Length compensation - see enclosed photo Tapping method: Taps are in the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.
In stock49,86 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!