Morse

Morse taper collet clamp - for Czech spindles Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that carry tools through this nut + thread. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Morse taper collet clamp Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : Suitable for all new spindles where the tools are driven only by the internal thread. This type is not suitable for older Czech spindles, which have a so-called "house" - through which the tools (except the thread) drift. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN228A

Clamping collet sleeve with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note : * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1492 Usage : Milling tool - for clamping milling cutters, drills and other tools with a cylindrical shank It is an old Czech design. We recommend switching to collet ER clamps and ER collets.

Overall Length: 170mm Pin Diameter: 7,5mm For Collet Clamp - Small Yoke: 44mm 220731/22 0731

Morse Clamp Clamp MK 2 x ER32 6 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse Clamp Clamp MK 2 x ER32 15 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp Clamp with MK 3 x ER 20 8 Clamps MK3xER20 (3xER20) Clamping Thread in Cone M12 Max. collar size: 13mm Other collet sizes can be purchased separately Contains collet: 1,5-2mm; 2-3mm; 3-4mm; 4-5mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm Supplied in Plastic Trunk Thread: up to 0.005mm Clamping Procedure: Fasten the clamp nut to the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with MK Cone MK 3 x ER 25 6 Clamps MK3xER25 (3xER25) Clamping Thread in Cone M12 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with morse cone MK 3 x ER 32 MK3xER32 (3xER32) Max. Collar Size: 20mm Bolt Threaded Bolt / Bolt: M12 Bolt Nut Diameter: 49mm For Collet Outer Diameter: 32mm Thread: up to 0.005mm ER32 Collet Can be purchased. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with Morse Cone MK 3 x ER 32 6 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case < :

Clamp Clamp with Morse Cone MK 3 x ER 32 15 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case < :

Clamp Clamp with Morse Taper MK 3 x ER 40 MK3xER40 (3xER40) Max. Collar Size: 30mm Bolt Threaded Thread / Pin: M12 Nut Clamp Diameter: 63mm For Collet Outer Diameter: 40mm Thread: Up to 0.005mm Collet ER40 Can be purchased. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. DIN 228A