MK pins with spacers

Long milling mandrel with Morse taper for clamping cylindrical / disc cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241433 / CSN 24 1433 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Milling mandrel with pen and spacers / spacer rings Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions: see product description for individual variants * To mount machine saw blades, it is necessary to remove the drive pin.

Milling cutter MK2 M10 threaded conical

Long milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: morse 4 Inner thread: M16 Diameter: 22mm Clamping part length: 320mm Total Length: 476mm Nut A^A’SN 241437: M20x1,5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241433 / CSN 24 1433 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Long milling mandrel for clamping push-in cutters / circular cutters and saws. Clamping cone: morse 4 Inner thread: M16 Diameter: 22mm Clamping part length: 400mm Total Length: mm Nut A „A’SN 241437: M20x1,5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A SN 241433 / CSN 24 1433 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.