Mitutoyo measuring instruments
-
Digital caliper micrometer 0-25 IP65, 293-240-30, Mitutoyo
Digimatic three-meter micrometer(without data output) Measuring range: 0 - 25 mm Reading: 0,001mm Diameter Carbide stylus size: 6.35 mm Accuracy: 0.001 mm Flatness: 0.003 mm Measuring force: 5-10N Automatic shut-off, higher including ABS, HOLD function Degree of protection IP65(against splashing water and fully against dust).
In stock270,47 € with VAT -
Digital caliper micrometer 0-25, 293-821-30, Mitutoyo
Digimatic three-meter micrometer(without data output) Measuring range: 0 - 25 mm Reading: 0,001mm Diameter Carbide stylus size: 6.35 mm Accuracy: 0.002 mm Flatness: 0.003 mm Measuring force: 5-10N Automatic shut-off Degree of protection: without IP
In stock210,61 € with VAT -
Digital caliper micrometer set 0-25; 25-50 mm IP65, 293-966-30, Mitutoyo
Two-piece set of clip micrometers with data output Measuring range: 0 - 25 mm; 25 - 50 mm Reading 0.001mm Tube Diameter Diameter: 6.35 mm Accuracy 0.001mm Degree of protection IP65 (anti splashing and dust proof) > Contains micrometers 293-230 and 293-231 and ceramic end gauge 130752 (25mm)
On request788,61 € with VAT -
Digital caliper 150mm IP67 MarCal 16EWR with round depth gauge, Mahr
Mahr 16 EWR Slide Gauge, 4103300, with Round Depth Gauge Degree of Protection - IP 67 Length: 150 mm Digital Step: 0,01mm Height of Digits: 7,5mm < Features: ON / OFF, AUTO-ON / OFF, RESET display reset, mm / inch values, electronics "Reference system" LOCK (keyboard lock) No data output, no sliding wheel Accuracy: -0,02mm DIN862 In case, including 1 battery, battery life approx. 3 years Dimensions: Length - total: 233mm Height of lower jaws: 40mm Height of jaws: 16.5mm Slide bar width: 16mm
In stock167,20 € with VAT -
Digital caliper 150mm IP67 MarCal 16EWR with flat depth gauge, Mahr
Mahr 16 EWR Slide Gauge, 4103300, with Round Depth Gauge Degree of Protection - IP 67 Length: 150 mm Digital Step: 0,01mm Height of Digits: 7,5mm < Features: ON / OFF, AUTO-ON / OFF, RESET display reset, mm / inch values, electronics "Reference system" LOCK (keyboard lock) No data output, no sliding wheel Accuracy: -0,02mm DIN862 In case, including 1 battery, battery life approx. 3 years Dimensions: Length - total: 233mm Height of lower jaws: 40mm Height of jaws: 16.5mm Slide bar width: 16mm
In stock167,20 € with VAT -
Lever gauge 38/0.4 mm, 0.01 mm Mahr, MarTest 800SG
Lever antimagnetic hundredths dial indicator, deviation meter ( watch ) - pupitas with hard metal touch Diameter of alarm: 38mm (actually measured 40.6 mm) Measuring range: -0.4- 0-0.4 mm Resolution: 0.01mm Scale type: 0-40-0 Measuring force: 0.15 N Yellow scale background Clamping shank: 8mm Precision : - according to DIN 878 (1983) : fe : 10.0 µm fges : 13.0 µm fu: 3.0 µm Repeatability: 3.0 µm Dimensions: Total height: 82mm ( even with touch) Length contact from the bearing: 18.5mm Width: 27.5mm Antishock - resistant to rapid changes in displacement and against the impact of the measuring tool Ball double lever, overload protection thanks to the friction clutch Diameter touch: 2mm Length of the touch itself: 14.5mm DIN2270
On request134,14 € with VAT -
Digital caliper 150mm, Mitutoyo ABS, 500-181-30
Mitutoyo ABSOLUTE DIGIMATIC AOS Slide Gauge with flat depth gauge and electromagnetic sensor Length: 150 mm Digit Step: 0.01mm Height of digits : 9mm ABS function, ie absolute and relative measurement No data output, without sliding wheel Accuracy: -0,02mm < In Stock, including 1 Battery, Battery Life 20000 Hours Dimensions: Length - Overall: 233mm Lower Jaw Height: 40mm Height of Upper Jaws : 16,5mm Slide bar width: 16mm
In stock141,28 € with VAT -
Digital caliper 200mm, Mitutoyo ABS, 500-182-30
Mitutoyo ABSOLUTE DIGIMATIC Slide Gauge with Flat Depth Gauge Length: 200 mm Numeric Step: 0.01mm Height of Numbers: 9mm ABS Function, ie Absolute & Relative Measurement Bez data output, without sliding wheel Accuracy: -0,02mm In case, including 1 battery, battery life 20000 hours Dimensions: Length - Total: 290mm Lower Jaw Height: 50mm Upper Jaw Height: 20mm Slide Bar Width: 16mm
In stock227,13 € with VAT -
Digital caliper 200mm, Mitutoyo ABS, 500-182-30, with calibration
Mitutoyo ABSOLUTE DIGIMATIC Slide Gauge with Flat Depth Gauge, Including Calibration Protocol Length: 200 mm Digit Step: 0.01mm Height of Numbers: 9mm ABS Function, Absolute and Relative Measurement Without Data Output, Without Sliding Wheel Accuracy: -0,02mm In case, including 1 battery, battery life 20000 hours < Dimensions: Length - Overall: 290mm Lower Jaw Height: 50mm Height of Top Jaws: 20mm Slide Bar Width: 16mm
On request225,88 € with VAT -
Digital caliper 150mm, Mitutoyo ABS, 500-184-30 with round depth gauge
Slide gauge Mitutoyo ABSOLUTE DIGIMATIC AOS with round depth gauge pr. 1,9mm Length: 150 mm Digit Step: 0,01mm Numeric Height: 9mm ABS Function, ie Absolute and Relative Measurement Without Data Output, Without Sliding Wheel Accuracy: -0,02mm In case, including 1 battery, battery life 20000 hours Dimensions: b> Length - Overall: 233mm Lower Jaw Height: 40mm Upper Jaw Height: 16.5mm Slide Bar Width: 16mm
In stock148,54 € with VAT -
Digital caliper 300mm, Mitutoyo ABS, 500-205-30
Mitutoyo ABSOLUTE DIGIMATIC Slide Gauge with Flat Depth Gauge Length: 300 mm Numeric Step: 0.01mm Height of Numbers: 9mm ABS Function, Absolute & Relative Measurement Bez Data Accuracy Accuracy: -0,02mm to 200mm -0,03mm above 200mm In case, including 1 battery, battery life 20000 hours Dimensions: Length - Overall: 404mm Lower Jaw Height: 64mm Height of Top Jaws: 22mm Slide Width strips: 20mm
In stock356,45 € with VAT -
Digital caliper 150mm IP67, Mitutoyo ABS, 500-706-20
Mitutoyo ABSOLUTE DIGIMATIC Full Depth Gauge with Flat Depth Gauge Degree of Protection - IP 67 Length: 150 mm Digit Step: 0,01mm Height of digits: 7,5mm ORIGIN / ABS functions, ie absolute and relative measurement No data output, no sliding wheel Accuracy: -0,02mm V Dimensions: Length - total: 233mm Lowering jaw height: 40mm Height of jaws: 16, 5mm Slide bar width: 16mm
In stock188,76 € with VAT
