Milling

ISO50 / ISO30 Straight Straightener ISO50 Straight Straight Cone ISO30 Inner Straight Cone Overall Length (without Stones): 122mm For Tools By Standard DIN2080 and JIS B 6339 / MAS DIN standards now available in electronic format (PDF) ČSN 241480

Honeycomb cutter Three-sided, non-symmetrical, for machining in three axes Material K30: for machining materials that produce a short, crumbly chip. Especially for gray cast iron, non-ferrous alloys, non-metallic materials Diameter 10mm Shank diameter: 12mm Overall length: 83mm Cutter length: 26mm

Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 10 mm Radius: 23mm Shoulder Length: 270mm & 290mm Bending Machine tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!

Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 12 mm Radius: 38mm Shoulder Length: 405mm & 420mm Bending Machine Bends Accurate Bending tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!

Crimping Adapter for PROFI Wiper Kit (VT_4,75_10_PROFI) Copper Tube: 4,75mm Guide Shank: 2,35mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

Crimping Adapter for PROFI (VT_4,75_10_PROFI) Copper Tube: 5,00mm Guide Pin: 2,5mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

Crimping Adapter for PROFI Perlite Set (VT_4,75_10_PROFI) For Copper Pipe: 6,00mm Guide Pin: 3,65mm Price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Application: Cast iron: K25 Sale, in stock 30 pcs as of May 22, 2017, when the set is taken off possible discount. Min. 10pcs.

Set of 6pcs - professional screwdrivers suitable for business operations Set includes: Flat Screwdriver: 1pcs 5,5 x 1,0 x length 100 x 210mm 1pcs 6.5 x 1.2 x length 125 x 240mm Philips Phillips screwdriver: 1pcs PH1 x 80 x 185mm 1pcs PH2 x 100 x 215mm Pozidrive Cross Screwdriver: 1pcs PZ1 x 80 x 185mm 1pcs PZ2 x 100 x 215mm Packaging in paper wrapper with window

SK Carbide / Carbide Cutter Extended / Long Type: Cylindrical with Radius - Type C Cutter Diameter: 6mm Cutting Length: 16mm Overall tool length: 150mm Diameter of chucking stem: 6mm Usage: Cross teeth are suitable for machining difficult to adjustable materials Highly alloyed steel, cast iron, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping

SK Carbide / Carbide Technical Cutter Extended / Long Material: TK (SK) Type: Cylindrical with Radius - Type C Cutter Diameter: 8mm Cutting Length: 20mm Overall tool length: 150mm Diameter of chucking stem: 6mm Usage: Cross teeth are suitable for machining difficult to adjust materials High alloy steel, cast iron, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping