Milling

Miller for straight-edged cutting pen grooves Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS Standard: ČSN 22 2185 Cat. No. - series: 320100

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions - see attached photo The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen Standard: DIN6358

Mini socket wrench for collet clamp Wrench for clamping nuts: according to the selected variant Usage: For loosening and tightening ER nuts of collet clamps type M (Mini)

Wrench for collet chuck, for collet chuck with hex nut Size: according to the selected variant Usage: For loosening and tightening hexagonal ER nuts of collet clamps Using a classic open key will damage the nut! We recommend using this exact key.

Conical / arrow / pin / countersink end mill with spiral cutting edges Angle: according to the selected variant Blade diameter - Dmin: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Number of blades: 4 Other dimensions - see product description for individual variants Material: HSS Standard - replacement for: ČSN 222814 / 580718 / DIN 1835P

Cobalt milling cutter for cutting pen grooves Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo5 - 5% cobalt Standard: ČSN 22 2185, DIN 850 Cat. No. - series: 320005 and 320015

Conical / arrow / pin / countersink end mill with straight edges Angle: according to the selected variant Blade diameter - Dmin: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard - replacement for: ČSN 222814 / 580718 / DIN 1835P

Conical / arrow / pin / countersink end mill face four-edged, four-toothed with weldon surface Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 25° Head angle: 12° Material: HSSCo8 Standard: ČSN 222814, DIN 1835P Cat. number - series: 580718

Cutter for T-slot milling Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard: ČSN 22 2180 Cat. No. - series: 310200

Milling mandrel with conical shank for cylindrical end mills, mandrel for holding cutters Clamping Morse cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241413 The goods come from excess stock, unused

Cobalt cutter for T-slot milling Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo5 Standard: ČSN 22 2180, DIN 851, ISO 3337 Cat. No. - series: 310205 and 310215

Cobalt roughing cutter for T-slot milling Diameter: 12.5 mm Blade width: 6.0mm Other dimensions - see the attached catalog sheet Material: HSSCo5 - 5% cobalt Standard: ČSN 22 2180, DIN 851, ISO 3337 Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), machining Ra 12.5 and rougher. Cat. No. - series: 314215N