Milling

One-sided angle socket cutter with corner radius Angle: according to the selected variant Diameter of the cutter (js 16): according to the selected variant Width (js14): according to the selected variant Diameter of the clamping hole (H7): according to the selected variant Radius on the edge: (depending on the selected variant) Other dimensions - see the attached catalog sheet Material: HSS - High-speed steel Standard: ČSN 222242 / 22 2242, DIN 1824 A Cat. No. - series: 852570

Fine-tooth cylindrical end mill Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: replacement for ČSN 222138 / production standard Zbrojovka Vsetín

Extra long end mill with four edges / four teeth, with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: 79mm Other dimensions - see product description for individual variants Helix angle: 30° Head angle: 12° Material: HSSCo5 (contains 5% cobalt) Standard: DIN1835B, extension of standard ČSN 222132 Usage: Type N - for materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code: series 121215E

Left-cutting angled one-sided end mill with underturned teeth These cutters are used because of the advantage of maintaining their shape even after face grinding. This is a simplified version of the cutter ČSN 222254 - see photos Angle: according to the selected variant Diameter of the cutter: according to the selected variant Diameter of the clamping hole: according to the selected variant Corner radius: according to the selected variant Other dimensions: see product description for individual variants Material: HSS - High-speed steel Custom production, atypical size, lower sub-level of standard ČSN 222254 / 22 2254 Usage: ordinary steel and non-sticky metal alloys Characteristics of these cutters: An underturned tooth is stronger and dissipates heat better from the cutting edge. Due to the angle of the back and the straight face, there is significantly greater cutting resistance when cutting directly than with ČSN 222254 cutters. They are easily resharpened Resale - excess stock, unused

Four-edged roughing end mill, four-edged / four-toothed with weldon surface Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Number of blades: 4 Material: HSSCo8 - High speed steel + 8% cobalt Coating: TiN - Titanium Nitride

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Order no. code - series: 124518 and 125518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR-P : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. Order no. code - series: 124518P and 125518P

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518 and 129518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR-F: For machining materials with medium to higher strength (up to 1200 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the functions of a roughing and finishing tool. Order no. code - series: 128518P and 129518P

Unused - asymmetrical double-sided angle socket cutter Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222244 / 22 2244 or its extension by custom production Resale - excess stock

Plug-in fine tooth milling cutter - cast Diameter: according to the chosen variant Height: according to the chosen variant Clamping diameter: according to the selected variant Other dimensions and fastening style - see product description for individual variants Material: HSS - cast ground cutter Standard: ČSN 222158 Usage : Structural and cast steels up to 800 MPa

Morse reduction milling cutters for taper shank drills Outer cone: according to the selected variant Inner cone: according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 MK5 = thread M20 Application: for clamping Morse taper drills, countersinks, reamers, countersinks and other Morse tools with a carrier in a milling machine that has a Morse taper in the spindle.