Milling

Clamping collet series: ER 40 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 472E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 40mm Length: 46mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Unused - symmetrical one-sided angle socket cutter Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222240 / 22 2240 Resale - excess stock The milling cutter does not have a recess for the screw - the bottom cannot be milled.

Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK4Internal thread of collet: M16 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)

Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228

Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228

Precision collet ER 40 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 472EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 40mm Length: 46mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 120517 and 121517

Symmetrical angular socket cutter for prismatic lines Angle: 45° Diameter of cutter (js 16): 40mm Width (js14) : 10mm Diameter of the clamping hole (H7): 10mm Other dimensions - see the attached catalog sheet Material: HSS or HSSCo5 - depending on the selected variant Standard: ČSN 222254 / 22 2254, DIN842 Cat. No. - series: 853270 and 853275V

Cylindrical end mill with four edges, four teeth Diameter: 2mm Blade length: 8mm Total length: 34 mm Clamping diameter: 4mm Material: HSS - High-speed steel Standard: ČSN 222136 / CSN 22 2136

Cylindrical end mill four-edged, four-toothed, semi-coarse-toothed Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Helix angle 25° (35°) Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222132 / 141200

End mill, with cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 844, ISO 1641, ČSN 222132 Usage: For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140208 and 140218

End mill with a long cutting edge, with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 844, ISO 1641, ČSN 222132 Usage: For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 141208 and 141218