Milling

Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 10 mm Radius: 23mm Shoulder Length: 270mm & 290mm Bending Machine tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!

Crimping Adapter for PROFI Wiper Kit (VT_4,75_10_PROFI) Copper Tube: 4,75mm Guide Shank: 2,35mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

Crimping Adapter for PROFI (VT_4,75_10_PROFI) Copper Tube: 5,00mm Guide Pin: 2,5mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

Crimping Adapter for PROFI Perlite Set (VT_4,75_10_PROFI) For Copper Pipe: 6,00mm Guide Pin: 3,65mm Price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Application: Cast iron: K25 Sale, in stock 30 pcs as of May 22, 2017, when the set is taken off possible discount. Min. 10pcs.

Weldon Clamp for 16mm Morse Mill Milling Cutters - MK2 Clamping Depth: 50mm Clamping Thread: M10

Weldon Clamp for 20mm Morse Shank Milling Cutters - MK2 Clamping Thread: M10

SK Carbide / Carbide Cutter Extended / Long Type: Cylindrical with Radius - Type C Cutter Diameter: 6mm Cutting Length: 16mm Overall tool length: 150mm Diameter of chucking stem: 6mm Usage: Cross teeth are suitable for machining difficult to adjustable materials Highly alloyed steel, cast iron, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping

SK Carbide / Carbide Technical Cutter Extended / Long Material: TK (SK) Type: Cylindrical with Radius - Type C Cutter Diameter: 8mm Cutting Length: 20mm Overall tool length: 150mm Diameter of chucking stem: 6mm Usage: Cross teeth are suitable for machining difficult to adjust materials High alloy steel, cast iron, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping

SK Carbide / Carbide Cutter Extended / Long Type: Cylindrical with Radius - Type C Cutter Diameter: 10mm Cutting Length: 20mm Overall tool length: 150mm Diameter of chuck stop: 6mm Usage: Cross teeth are suitable for machining difficult to adjustable materials Highly alloyed steel, cast iron, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping

SK Carbide / Carbide Technical Cutter Extended / Long Material: TK (SK) Type: Cylindrical with Radius - Type C Cutter Diameter: 12mm Cutting Length: 25mm Overall tool length: 150mm Diameter of chucking stem: 6mm Usage: Cross teeth are suitable for machining difficult to adjust materials High alloy steel, cast iron, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping