Milling

Milling washers ( milling washer ) , vise washers , milling washers Set of 18 pairs of 150mm length Dimensions of washers: 8x17, 8x19, 8x21, 8x23, 8x25, 8x27, 8x29, 8x31, 8x33, 8x35, 8x37, 8x39, 8x41, 8x43, 8x45, 8x47, 8x49, 8x51 mm Accuracy: 0.01mm Flatness: 0.005mm Hardness 55 HRC

10, 10x30, 10x32 mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Milling washers ( milling washer ) , vise washers , milling washers Set of 9 pairs, length 160mm Dimensions of washers: 3x10; 3x14; 3x18; 3x22; 3x26; 3x30; 3x34; 3x38; 3x42mm Accuracy: 0.01mm Flatness: 0.005mm Hardness 45-50 HRC

Milling Washers, Vices, Milling Washers Set of 9 Pairs 160mm Length Washer Size: 4x10; 4x14; 4x18; 4x22; 4x26; 4x30; 4x34; 4x38; 4x42mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Milling washers ( milling washer ) , vise washers , milling washers Set of 9 pairs, length 160mm Dimensions of washers: 5x10; 5x14; 5x18; 5x22; 5x26; 5x30; 5x34; 5x38; 5x42mm Accuracy: 0.01mm Flatness: 0.005mm Hardness 45-50 HRC

Milling Washers, Vices, Milling Washers Set of 8 Pairs 160mm Length Washer Size: 8x12; 8x17; 8x22; 8x25; 8x28; 8x32; 8x36; 8x38mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Force screw in the knife holder. Thread Size: M4 Head: TORX 15 Overall length (with head): 8mm

Set of straight collets Set contains collets: 3/4/5/6/8/10/12/14/16/18/20/22/24/25 mm Morse taper: MK 4 Internal thread collet: M16 Usage: For direct clamping !Machine with a cylindrical shank

Honeycomb cutter Three-sided, non-symmetrical, for machining in three axes Material K30: for machining materials that produce a short, crumbly chip. Especially for gray cast iron, non-ferrous alloys, non-metallic materials Diameter 10mm Shank diameter: 12mm Overall length: 83mm Cutter length: 26mm

Carbide ( TK ) milling cutter for chamfering edges / cemented carbide chamfer Number of blades: 4 pcs. Diameter of the working part: 6mm, tolerance h6 Apex angle: 90° Minimum diameter of truncation: Dc: 1.0mm Total length: 50mm Helix angle: 0° Face angle: 0° Clamp shank: 6mm, tolerance h6 Standard: DIN 6535 HA Coating: PVD ( TiAlN ) Usage: Steel up to 55 HRC Low alloy steels up to 600 MPa Alloy steels up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Ductile cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Hand Loader for Thread Repair Inserts For Inserts: M10 The stop for various lengths of inserts can be adjusted - it is secured by an Allen screw.

Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 10 mm Radius: 23mm Shoulder Length: 270mm & 290mm Bending Machine tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!