Milling

Single-edged / single-tooth end mill 6x26 mm ( 6x26mm ) with cylindrical shank with bevelled edge, right-hand cutting with left-hand helix Diameter D (js16) : 6 mm Blade length l : 26mm Total length: 70mm Clamping shank d (h6): 6mm Number of blades: 1 pc. ( 1 pc. ) Material: HSS Standard: custom production Usage: Non-ferrous metals and plastic The milling cutter comes from above-standard stock or as custom production - can be without laser label. Order no. code: 13504/722D1 6x26 - custom production

Cutter for cutting pen grooves Blade width: 8.0mm Number of teeth: 10 Clamp shank: 10 mm Cutter length: 56mm Standard: company standard, replacement for ČSN 222185

Ring cutter - set of 3 cutters (1x roughing 1x semi-roughing 1x finishing) Module: M2.5 Angle: 20° x 10° x 10° Marking on cutters: h=5.625mm, h0 = 12.15, Lw=2381 Diameter: 140mm Clamping diameter: 40mm Material: HSS Standard : ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M4 Angle: 20° x 10° x 10° Marking on cutters: h =9.0mm, h0 = 13.89, Lw=2670 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M5 Angle: 20° x 10° x 10° Marking on the cutters: h =11.25mm, h0 = 13.89, Lw=2624 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Milling spindle with taper shank for cylindrical milling cutter, Milling cutter pin MK3 thread with M12 internal thread Clamping diameter for milling cutters: 22mm Clamping length: 47mm < br> Screw: M10 with cross head ČSN 241413 Goods coming from abnormative stocks, unused

Long milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: SK ISO 30 Inner thread: M12 Diameter: 16mm Clamping part length: 250mm Total length: 366mm Nut A^14SN 241437: M14x1 , 5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241431 / CSN 24 1431 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Long milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: morse 4 Inner thread: M16 Diameter: 22mm Clamping part length: 320mm Total Length: 476mm Nut A^A’SN 241437: M20x1,5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241433 / CSN 24 1433 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Long milling mandrel for clamping push-in cutters / circular cutters and saws. Clamping cone: morse 4 Inner thread: M16 Diameter: 22mm Clamping part length: 400mm Total Length: mm Nut A „A’SN 241437: M20x1,5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A SN 241433 / CSN 24 1433 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Milling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.

Milling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.

Milling Cutter for Socket Cylindrical Milling Cutters Milling Cutter Type: Stones and 4x M12 Screw Clamping Taper: SK ISO 50 Internal Thread: M24 Diameter: 40mm Length of Clamping Part : 38mm Screw: Cross-head M20 Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Use: These spindles are used for clamping pre-cut tools.