Milling

Carbide (TK) milling cutter for hardened steel milling, type HRD Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Other dimensions - see enclosed catalog sheet Coating: special three-layer coating + tumbling Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the weldon face / corner radius / longer blade / clamping diameter / internal cooling in the middle or in a helix.

Long milling mandrel for clamping socket cylindrical / circular cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241431 / CSN 24 1431 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Long milling mandrel with Morse taper for clamping cylindrical / disc cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241433 / CSN 24 1433 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Coarse-tooth circular circular saw Diameter: according to the selected variant Disc width: according to the selected variant Diameter of the clamping hole: according to the selected variant Material: HSS - unless otherwise stated Usage: steel, cast iron, non-ferrous metals, plastics Standards: CSN 222916.1 - disc with body grinding towards the center - does not grip the material CSN 222916 - disc with full body profile

Clamping collet series: ER 16 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 426E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 16 with higher clamping accuracy Size: according to the selected variant Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 426EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precision clamping sealed collet ER 16 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 426EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 16mm Length: 28mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Face and corner milling head AKKO MAKINA for replaceable inserts Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: APKT 1003 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Face and corner milling head AKKO MAKINA for replaceable inserts Diameter: according to the selected variant Number of blades: according to the selected variant Type of inserts: depending on the selected variant - type SDXT or SDET Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Milling insert for hardened steel, replaceable insert, insert APGW 160408 HRC55 Suitable for holders for APKT 1604 or APMT 1604 inserts Radius: 0.8mm Material: CBN(1x) CBN coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Face and corner milling head AKKO MAKINA for replaceable inserts Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: BDMT 11T3 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Face and corner milling head for interchangeable inserts - VBD SANDVIK R390 Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant - R390 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.