Milling

Retracting / clamping / end screw of tool shanks with ISO 40 taper (7:24) for automatic exchange / pulling pin, screw M16, M16x45° with gasket, with hole - drilled MAS BT40 x 45° sealed with cooling hole Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

MAS BT50 x 30 ° / MAS BT50 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

Retracting / clamping / end screw of tool shanks with taper ISO 50 ( 7:24 ) for automatic exchange / pulling pin, screw M24, M24x45° MAS BT50 x 45° Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a° : 45° Standard: JIS B 6339, MAS403-1982 Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Retracting / clamping / end screw of tool shanks with taper ISO 50 ( 7:24 ) for automatic exchange / pulling pin , screw M24 , M24x45° , with hole - drilled MAS BT50 x 45° with hole for cooling Top angle of the pin (lower part) : 45° Top angle of the pin (upper part) : 30° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 1mm Length of working part: 3.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 2.5mm Length of the working part: 7.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Slotting cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 3mm Length of the working part: 9.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 4mm Length of the working part: 11.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 5mm Length of working part: 13.0mm Total length: 50mm Screw: 35° Clamp shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 6mm Length of the working part: 16.0mm Total length: 50mm Screw: 35° Clamping shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 12mm Length of working part: 30.0mm Total length: 75mm Screw: 35° Clamp shank: 12mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 14mm Length of the working part: 35.0mm Total length: 100mm Screw: 35° Clamping shank: 14mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo