Milling

Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 80 mm Home washers Dimensions: 4x14, 4x16, 4x18, 4x20, 4x22, 4x24, 4x26, 4x28, 4x30, 4x32, 4x35, 4x40, 4x45, 4x50 mm Accuracy: 0,01mm Work surface area: 0,005mm Hardness 55 HRC

Set of 14 pairs, 10x30, 10x32, 10x35, 10x40, 10x45, 10x50 mm Accuracy: 0,01mm Work surface area: 0,005mm Hardness 55 HRC

Threaded nut for collet chuck ER 25 Outer diameter: 42mm Nut width: 20mm Inner diameter (threaded): 30,5mm Thread M32x1,5 < br> Opening: 21,4mm Matrix has internal bearing and gasket to prevent dust and dirt from entering the collet / clamps DIN6499 Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture.

Reducing insert - reduction for milling machine through short, ISO50/ISO30, ISO50/30 External steep taper DIN2080 ISO50 (thread M16) Internal steep taper BT30 ISO30, into which an M12 screw is inserted Total length (without drift stones): 160mm For tools according to DIN2080 and JIS B 6339 /MAS BT/ Standard: ČSN 241480

Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40 External steep taper DIN2080 ISO50 (thread M16) Internal steep cone BT40-ISO40, into which M12 screw is inserted Total length (without drift stones): 158mm For tools according to the standard JIS B 6339 /MAS BT/ Standard: ČSN 241480

Set of spare touch sticks for the indicator. Clamping on thread M 2.5. The set contains 22 pcs of styles in different designs

SK Carbide / Carbide Cutter Material: TK (SK) Type: Taper Shaft - KEL Type Cutter Diameter: 10mm Cutting Length: 20mm Overall Length: 60mm Diameter of chucking stem: 6mm Application: Cross teeth are suitable for machining difficult to process materials Highly alloyed steel, cast iron, stainless steel, refractory steel < br> Suitable for chamfering, deburring, deburring, surface repair after welding, surface shaping Cat. No .: 21125087

Collet holder HSK F 63 ER 40 - 75 mm Type HSK F63 ER40 AD - cooling guided through the center Length from cone to holder: 75mm Max. collet size: 30mm For collets with outer diameter: 40mm Diameter of clamping nut: 62mm Clamping stem design for aut. replacement: DIN69893 F ER40 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip) Cat. no.: F63.02.26

Regofix collet chuck HSK-A 63 x ER32 - 100mm Type HSK A63 ER32 AD - center-cooled cooling Length from cone to chuck: 100mm Max. collet size: 20mm For collets with outer diameter: 32mm Clamping nut diameter: 49mm Clamping shank design for cars. exchange: DIN69893 A ER32 collets can be purchased separately. Throw: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 There is a hole in the collar for a data carrier according to DIN69873(Balluffchip)

SK Carbide / Carbide Technical D0406 Material: TK (SK) Type: Ball - Type D Cutter Diameter: 4mm Cutting Length: 3mm Overall Length : 55mm Diameter of Chucking Stopper: 6mm Usage: Cross teeth are suitable for machining difficult to enrich materials Highly alloyed steel, cast iron, stainless steel, refractory oclei Suitable for edge shrinkage, deburring, deburring, surface repair after welding, surface shaping

Diamond cutters - 20pcs in a set of 5pcs diamond cutting discs Shank 3,0mm Shank length: 30 - 40mm The set contains 20pcs of different diamonds bodies(max. diameter 4mm) Wheels dia. : 16(2x) / 20/22 / 25mm Application: use for grinding, drilling, engraving on glass, steel, ceramics, light metals, alloys

Diamond Cutter 30 Piece Set, Diamond Cutter Cutter Set Stopwatch 2,3mm Stopper Length: 31mm Diameter: up to 5mm Application: grinding, drilling, engraving on glass, steel, ceramics, light metals, alloys More info on request