Milling

Type pin: 30 ° Inner pin angle: 15 ° (see photo) d1: 28mm d2: 21mm d3: 25mm l1: 74mm l2: 34mm l3: 25mm DIN: 41Cr4 / 42Gr4 - according to DIN EN ISO / TS 22455 / DIN69872-1988 / DIN 69872- : 41Cr4

> 1x57mm; 2x67mm; 2x77mm; 1x81mm; 2x95mm; 1x116mm Carbide material: P20 - for steel Use: - side head set - for lateral boring (inner hole wall)

Right > 1x57mm; 2x67mm; 2x77mm; 1x81mm; 2x95mm; 1x116mm Carbide material: P20 - for steel Use: - front head set - for front boring (bottom)

> 1x79mm, 1x90mm, 1x93mm, 1x102, 3x108mm, 1x124mm, 1x128mm, 1x140mm, 1x148mm, 1x156mm Carbon material: P20 - for steel Use: - front boring (bottom)

K10 Clamping diameter: 3,175 mm Overall length: 120 mm Size of tip / tip (T): 3,0 mm Angle of tip (A): 30 st Suitable for ABS, PVC, AKRYL, PLAST

Diameter 6 mm Cutting length 52mm Overall length 80mm Clamping diameter 6mm Suitable for acrylic, wood, aluminum, brass, steel.

Diameter 6 mm Cutter length 72mm Overall length 100mm Clamping diameter 6mm Suitable for acrylic, wood, aluminum, brass, steel.

Mandrel for clamping saw blades For saws with a hole: 5mm( especially for saws diameter 25, ÄOSN 222910; 222913; 222916) Clamping shank 12mm Shank length 35mm Total length 46mm Clamping flanges with a diameter of 12mm, clamping lock vit M5 The mandrel is suitable for clamping the saw up to a maximum thickness of 2.5 mm. Clamping shank is hardened and ground Surface treatment - blackening, wrench nut 8mm is galvanized For precise clamping of the saw blade and takes Due to its undulations, the seating surfaces are relieved from the center by selecting

12mm

12mm

12mm

Mandrel for clamping saw blades For saws with a hole: 16mm( especially for saws with a diameter of 63mm and some 80mm, No. 222910; 222913; 222916) Clamping shank 16mm Shank length 35mm Total length 67mm Clamping flanges with a diameter of 25.7mm, clamping thread M12x1 The mandrel is suitable for clamping the saw up to a maximum thickness of 2.5 mm. Clamping shank is hardened and ground Surface treatment - blackening, wrench nut 19mm is galvanized For precise clamping of the saw blade and takes Due to its undulations, the seating surfaces are relieved from the center by selecting