Milling

Quick-acting CNC chuck for milling cutters Suitable for cylindrical shank cutters with diameter: 25mm Clamping cone: ISO40, thread M16 Chuck height from cone end: 102mm Chuck Outer Diameter: 56mm Diameter of Tightening Nut: 54mm Suitable for CNC with Exchanger Type: DIN 69871 Use: Only for Milling Cutters with Cutter Diameter 25mm, Other Diameters can not clamp, respectively. chuckle is unique. Advantages: High clamping force, partial absorption

Weldon Clamp for 8 mm Cutters with ISO 40x8 mm Shank Clamping Length: 50 mm For Automata. exchanger type: DIN Application: For CNC machines DIN 1835-B, ČSN 247205, DIN 69871-A

Weldon chuck for 14mm cutters with ISO cylindrical shank 40x14 mm Length of clamping part: 50 mm For the machine. exchanger type: DIN Usage: For CNC machines Standard: DIN 1835-B, ČSN 247205, DIN 69871-A Balance: G2.5/25,000 rpm

Weldon chuck for 18mm cutters with ISO cylindrical shank 40x18 mm Length of clamping part: 63 mm For the machine. exchanger type: DIN Usage: For CNC machines Standard: DIN 1835-B, ČSN 247205, DIN 69871-A Balance: G2.5/25000 rpm

Weldon clamp for 40mm cutters with ISO 40x40 mm cylindrical shank Clamping screws: 2x hexagon socket with thread M20x1,5 Clamping lenght: 120 mm For automatic. exchanger type: DIN Application: For CNC machines DIN 1835-B, ČSN 247205, DIN 69871-A

Collet chuck ISO 50 x ER 32 - 100 8 pcs of collets ISO50xER32(50xER32) Clamping shank design for cars. replacement: DIN Set contains wrench and 8 collets Max. collet size: 20mm Standard: DIN 69871 Collet chucks: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Supplied in a plastic case Pliers clamping procedure: Snap the collet into the clamping nut - according to the Attached image.

Type: A - With Cooling Hole < / b> Top Peg Angle: 30 ° Inner Pin Angle: 15 ° (see photo) d1: 13mm d2: 9mm d3: 13mm l1: 44mm < br> l2: 24mm l3: 19mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

Type Pin: 30 ° Internal Pin Angle: 15 ° (see photo) d1: 13mm d2: 9mm d3: 13mm l1: 44mm l2: 24mm l3: 19mm DIN EN Standards: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-B DIN: 41Cr4 / 42Gr4 - : 41Cr4

Type: A - With Cooling Hole Type A - With Cooling Hole Top Pin Angle: 30 ° Internal Pin Angle: 15 ° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2 : 26mm l3: 20mm | Normservis.com DIN standards now available in electronic format (PDF) ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872- br> - according to EN: 41Cr4

Retracting / clamping / end screw of ISO 40 ( 7:24 ) taper shank tools for automatic change / pulling pin, screw M16 Type: A - with hole for cooling and sealing with o-ring Top angle of pin: 30° Inner angle of pin: 15° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2: 26mm l3: 20mm Standard: ČSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Type pin: 30 ° Internal pin angle: 15 ° (see photo) d1: 19mm d2: 14mm d3: 17mm l1: 54mm l2: 26mm l3: 20mm DIN EN Standards: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-B DIN: 41Cr4 / 42Gr4 - : 41Cr4

Type: A - With Cooling Hole d1: 23mm d2: 17mm d3: 21mm l1: 65mm l2 d1: 23mm d2: 17mm d3: 21mm l1: 65mm l2: 30mm l3: 23mm Norms: CSN 220451 / CSN 22 0451 / DIN69872-1988 / DIN 69872-A DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4