Milling

Carbide ( TK ) multifunctional / universal milling cutter made of cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h6 Coating: according to the chosen variant of the variant Apex angle: 60° Other dimensions - see the attached catalog sheet Standard: PN-ZPS, DIN 6535 HA Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S390002.060 (AlTiN)

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241411 / CSN 24 1411 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The goods come from excess stock, unused

Milling mandrel for clamping cylindrical socket cutters, securing with two keys / for milling heads with cylindrical drilling Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241421 / CSN 24 1421 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Working part diameter: according to the selected variant, tolerance h6 Top angle: 120 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Medium-toothed circular circular saw Diameter: according to the selected variant Disc width: according to the selected variant Diameter of the clamping hole: according to the selected variant Material: HSS - unless otherwise stated Usage: steel, cast iron, non-ferrous metals, plastics Standards: CSN 222913.1 - disc with body grinding towards the center - does not grip the material CSN 222913 - disc with full body profile

Carbide cutter / sintered carbide cutter Diameter of the working part: according to the selected variant Top angle: 60 ° Helix angle: 0 ° Forehead angle: 0 ° Number of edges: dia.4-6mm - 4-edges dia.8mm - 5-edges dia.10-12mm - 6-edges Other dimensions: see product description for individual variants Standard: DIN 6535 HA Coating: PVD (TiAlN) Usage: Steel up to 55 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Diameter of the working part: according to the selected variant Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Number of edges: dia.4-6mm - 4-edges dia.8mm - 5-edges dia.10-12mm - 6-edges Other dimensions: see product description for individual variants Standard: DIN 6535 HA Coating: PVD (TiAlN) Usage: Steel up to 55 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide (TK) milling cutter for roughing, straight face, cutting edges through the center, with weldon face Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Helix: 45 ° Other dimensions - see enclosed catalog sheet Coating: TiCN Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius or a longer blade.

Carbide (TK) milling cutter for roughing, straight face, cutting edge through the center Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Number of edges: 5br. Helix: variable, to reduce vibration Other dimensions - see enclosed catalog sheet Coating: BIGAAN Standard: DIN6535 Application: steel up to 1600 MPa, stainless steel and heat-resistant steel (Hastelloy, Hardox, etc.) Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius, longer blade, different clamping diameter.

Carbide (TK) cutter, straight face, cutting edge through the center Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Number of edges: 5br. Helix: variable, to reduce vibration Other dimensions - see enclosed catalog sheet Coating: triple Cr coating Standard: DIN6535 Application: stainless steel and classic steel up to 1600 MPa, Hastelloy, Hardox etc. Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius, longer blade, different clamping diameter.

Carbide (TK) milling cutter for hardened steel milling, type HRD Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Other dimensions - see enclosed catalog sheet Coating: special three-layer coating + tumbling Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the weldon face / corner radius / longer blade / clamping diameter / internal cooling in the middle or in a helix.