Milling

Clamp Clamp ISO 30 x ER 25 - 63 ISO30xER25 (30xER25) Design of clamping shank for cars. replacement: DIN Max. : 3-4mm, 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm Supplied in plastic case Collet clamping procedure: Click on the collet into the clamping nut - according to the attached picture.

Collet chuck ISO 30 x ER 25 - 63 ISO30xER25(30xER25) Clamping shank design for cars. exchange: DIN Max. collet size: 16mm Set includes wrench and 10pcs collet Standard: DIN 69871 Collar diameter for feeder: 50mm Capacity: up to 0.005 mm Balance: G6.3 / 12,000 rpm. Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm, 11- 12mm, 15-16mm < br> Supplied in a plastic case Procedure for clamping the collet: Snap the collet into the clamping nut - according to the stored image.

Pliers clamp ISO 30 x ER 32 - 63 ISO30xER32(30xER32) Clamping shank design for cars. exchange: DIN Max. collet size: 20mm Set includes wrench and 6 collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks diameters: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic m trunk Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Pliers clamp ISO 30 x ER 32 - 63 ISO30xER32(30xER32) Clamping shank design for cars. exchange: DIN Max. collet size: 20mm Set includes wrench and 15pcs collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm 5-6mm, 6-7mm, 7-8mm, 8-9mm, 9-10mm, 10-11mm, 11-12mm, 12 -13mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Supplied in plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.

Collet chuck ISO 40 x ER 11 - 100 ISO40xER11(40xER11) Clamping shank design for cars. exchange: DIN Shaft length with nut: 100mm Max. collet size: 7mm Set contains wrench and 7pcs collets Standard: DIN 69871 Collet chucks diameters: 0,5-1mm, 1,5-2, 0mm, 2.5-3mm, 3.5-4mm, 4.5 -5mm, 5.5-6mm, 6.5-7mm Supplied in a plastic case Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Pliers clamp ISO 40 x ER 16 - 63 ISO40xER16(40xER16) Clamping shank design for cars. exchange: DIN Max. collet size: 10mm Set includes wrench and 8 collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks: Supplied in a plastic case Collet chuck procedure: Collet snap the tin into the clamping nut - according to the attached picture.

Clamp Clamp ISO 40 x ER 20 -70 6 pcs of collet ISO40xER16 (40xER20) Carrying chuck for cars. replacement: DIN Shaft length with nut: 63mm Max. collet size: 10mm Set contains key and 6pcs of collet Standard: DIN 69871 Collet clamp diameters: 2-3mm; 3-4mm; 4-5mm; 5-6mm; 7-8mm; 9-10mm Danger: up to 0.005mm Supplied in plastic case Clamping Procedure: Clamp the clamping nut into the clamping nut - according to the attached picture.

ISO 40 x ER 25 - 70 clamp clamp 6 piece collet ISO40xER25 (40xER25) Carrying chuck for car. replacement: DIN Shaft length with nut: 40mm Max. collet size: 16mm Set includes key and 6pcs DIN 69871 Collet clamp diameters: 3-4mm, 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm Supplied in plastic case Friction: up to 0.005mm Collet clamping procedure: Fasten the clamping nut into the clamping nut - according to the attached picture.

Collet chuck ISO 40 x ER 25 - 70 6 pcs of collets ISO40xER25(40xER25) Clamping shank design for cars. exchange: DIN Shaft length with nut: 40mm Max. collet size: 16mm Set includes wrench and 10pcs collets Standard: DIN 69871 Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm, 5-6mm, 6-7mm, 7-8mm , 8-9mm, 9-10mm, 11-12mm, 15-16mm Supplied in a plastic case Throw: up to 0.005mm Balance: G6.3 / 12,000 rpm. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamp clamp ISO 40 x ER 32 - 70 6 pcs collet ISO40xER32 (40xER32) Carrying chuck for cars. replacement: DIN Shaft length with nut: 40mm Set contains key and 6 collet Max. Clamp size: 20mm DIN 69871 Collet clamp diameters: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Handle: up to 0.005mm < br> Supplied in plastic case Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture.

Collet chuck ISO 40 x ER 32 - 70 15 pcs of collets ISO40xER32(40xER32) Clamping shank design for cars. exchange: DIN Shaft length with nut: 40mm Set contains wrench and 15 collets Max. collet size: 20mm Standard: DIN 69871 Collet chucks diameters: 2-3mm, 3-4mm, 4-5mm 5-6mm, 6-7mm, 7-8mm, 8 -9mm, 9-10mm, 10 -11mm, 11-12mm, 12-13mm, 13-14mm, 15-16mm, 17-18mm, 19-20mm Throw: up to 0.005mm Balancing: G6.3 / 12,000 rpm. Supplied in a plastic case Pliers clamping procedure: Snap the collet into the clamping nut - according to the Attached image.

Quick-acting CNC chuck for milling cutters Suitable for milling cutters with cylindrical shank diameter: 16mm Clamping cone: ISO40, thread M16 Chuck height from cone end: 88mm Chuck Outer Diameter: 50mm Diameter of Tightening Nut: 48mm Suitable for CNC with Exchanger Type: DIN 69871 Usage: Only for Cutters with Diameter 16mm, Other Diameters can not clamp, respectively. chuckle is unique. Advantages: High clamping force, partial absorption