Milling

Set of 9 sealed ER 25 thread collets for use with internally cooled taps, ER25 collets The set includes collets : 3.5x2.7 / 4.5x3.4 / 6.0x4.9 / 7.0x5.5 / 8.0x6.2 / 9.0x7.0 / 10.0x8.0 / 11.0x9.0 / 12.0x9.0 mm , i.e. for clamping machine taps DIN371/374/376 in the range M3-M16 (with the exception of M3.5 / M7) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN 6499 GEC / 430GEC Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar

Clamping collet series: ER 16 with higher clamping accuracy Size: 1 mm Collet chuck diameter: 0.5 - 1.0 mm Clamping accuracy: 0.005mm(tested on a mandrel with a length of 6mm) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. Collet size: Diameter: 16mm Length: 28mm Pliers clamping procedure tiny: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 1.5 mm Collet chuck diameter: 1.0 - 1, 5mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 6mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 16 with higher clamping accuracy Size: 2.0 mm Collet chuck diameter: 1.5 - 2, 0mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 10mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 2.5 mm Collet chuck diameter: 2.0 - 2, 5mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 10mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 3.5 mm Collet chuck diameter: 3.0 - 3, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 4.5 mm Collet chuck diameter: 4.0 - 4, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 5.5 mm Collet chuck diameter: 5.0 - 5, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Set of 12 sealed collets ER 25 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm Collet clamping procedure: Snap the collet into the clamping nut - according to the application © image. Standard: DIN 6499 C / 430EC Tools with internal cooling are not manufactured with a shank smaller than 3mm, therefore this set starts from 3mm diameter.

Set of 18 sealed collets ER 32 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Collet clamping procedure: The collet clicks into place Insert into the clamping nut - according to the enclosed figure. Standard: DIN6499C / 470EA Tools with internal cooling with a shank smaller than 3mm are not manufactured, therefore this set starts from 3mm.

Collet chuck ISO 30 x ER 11 - 63 ISO30xER11(30xER11) Clamping shank design for cars. exchange: DIN Max. collet size: 7mm Set includes wrench and 7pcs collet Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks diameters: 0.5-1mm, 1.5-2.0mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5, 5-6mm, 6,5-7mm Supplied in a plastic case Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.

Pliers clamp ISO 30 x ER 16 - 63 ISO30xER16(30xER16) Clamping shank design for cars. exchange: DIN Max. collet size: 10mm Set includes wrench and 8 collets Standard: DIN 69871 Feeder collar diameter: 50mm HAf Capacity: up to 0.005 mm Balance : G6.3 / 12,000 rpm. Collet chucks: Supplied in a plastic case Collet chuck procedure: Collet snap the tin into the clamping nut - according to the attached picture.