Milling

Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Application: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbide Cutting conditions - see enclosed PDF sheet

Milling insert VBD APKT 1003 PDER - 05 Coating: PVD, TiAlN Series JC8050: Stiffer substrate, excellent resistance to chipping and high temperatures. Suitable for intermittent cutting when machining hard steels, stainless steels and heat-resistant alloys. Use: universal, also suitable for highly hardened steel Steel: P25-P40 Stainless steel: M25-M40 Superalloys: S20-S40 Regular conditions - see the attached photo The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replaceable milling insert APKT 160408PDER-AL CA1000, suitable replacement for APGT 1604PDER insert Radius: 0.8mm Coating: uncoated, polished surface CA1000 Series: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Vc = 200-800 m / min. fz = 0.1-0.3 mm / rev. Type AL: Very sharp breaker for machining aluminum and plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart.

Interchangeable milling insert APKT 1604PDER - DCM, VBD for milling Very low cutting resistance due to the geometry of the cutting edge, high quality of the machined surface. The plate is coated, suitable for ordinary steel or stainless steel Dimensions: l=17mm d=9.4mm s=5 .67mm d1=4.6mm Original packaging Usage: suitable for machining steels without coolant at high cutting speeds Classical steel: P20-P35 Stainless steel: M20-M30 These VBDs are fully compatible with APKX 1604 type VBDs The price shown is for 1pc, not for the whole pack, if you want to buy the whole pack , put 10 pcs.in the basket

Interchangeable milling insert APKT 1604PDER , VBD for milling CVD coating , TiCN-Al2O3 Very low cutting resistance due to the geometry of the cutting edge, high quality of the machined surface. The insert is coated, has a long service life even when milling hard-to-machine (high-alloy) steels. Dimensions: l=17mm d=9.4mm s=5.67mm d1=4.6mm Original packaging Usage: suitable for machining steels without coolant at high cutting speeds Classical steel: P15-P30 Cast iron: K15-K25 Stainless steel: M15 -M25 These VBDs are fully compatible with APKX 1604 type VBDs Contains 10.5% cobalt, grain 1-2um, hardness HV30 : 1400 Specified the price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable milling insert APMT 1135PDTR M01, insert for milling Application: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbides The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replaceable milling insert APMT 1604PDER DP5320, suitable replacement for APKT 1604 PDER insert Coating: PVD, AlTiN-TiN < br> Blade material: DP5320 Application: universal Steel: P15-P35 Stainless steel: M10-M30 Cast iron: K10 -K30 Heat-resistant steel: S10-S25 Hardened steel: H15-H30 Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10pcs in the basket.

Interchangeable milling insert APMT 1604PDER-H2 VP15TF, suitable replacement for APKT 1604 PDER inserts Radius: R 0.8 mm Coating: AlTiN Insert material: VP15TF Usage: general machining, intermittent cutting Steel: P10-P30 Stainless steel: M20-M30 Cast iron: K20-K30 Refractory steel: S10-S20 Hardened steel : H10-H20 ; >40 HRC The price shown is for 1pc, not for the whole package, if you want to buy the whole package, put 10pcs in the basket.

T-slot / insert for insert - for VBD Diameter: 32mm Width of groove: 10mm Angle: 90 ° Number of bits: 4 Clamping diameter: 25 mm Overall length: 100 mm Other dimensions - see attached catalog sheet Screw: M2,5 x 6mm / T8 Type VBD: 1) CCMT 0602 2) CCGT 0602 CCMT 0602 - Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precision machining of the body and insert for the insert, jointing material of the Swiss manufacturer SFS guarantee the quality and long life of the AKKO tools. Kat. No. ATSM90-CC06-D32X10-W25-L100-Z04

12mm

12mm

Counterboring / deburring cutter Cutter angle: 90° Dmin: 10mm Dmax: 86.4mm Total tool length: 110mm Diameter clamping shank: 25mm Number of blades: 2 Material: HSSCo5 Standard: custom production, B34013 / 13501/805D1