Milling

Four-edge / four-tooth end mill 10x22 mm ( 10x22mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) : 10 mm Length blade l : 22mm Clamping shank d (h6) : 10mm Total length : 72mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.100(custom production)

Four-edge / four-tooth end mill 12x26 mm ( 12x26mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) :12 mm Length blade l: 26mm Clamping shank d (h6): 12mm Total length: 83mm Number of blades: 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.120 ( custom production)

Four-edge / four-tooth end mill 15x26 mm ( 15x26mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) : 15 mm Length blade l: 26mm Clamping shank d (h6): 12mm Total length: 83mm Number of blades: 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.150(custom production)

Four-blade / four-tooth end mill 19x32 mm ( 19x32mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) :19 mm Length blade l : 32mm Clamping shank d (h6) : 16mm Total length : 92mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.190(custom production)

Four-edge / four-tooth end mill 20x38 mm ( 20x38mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) :20 mm Length blade l : 38mm Clamping shank d (h6) : 20mm Total length : 104mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.200(custom production)

Roughing end mill 40x125 mm ( 40x125mm ) , with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 40 mm Blade length l : 125mm Clamping shank d (h6) : 40mm Total length : 210mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Helix angle: 45° Use: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order. code: outside the norm - series 13504-534 D1

Roughing end mill 50x150 mm ( 50x150mm ), with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 50 mm Blade length l : 150mm Clamping shank d (h6) : 50mm Total length : 250mm Number of blades : 6 pcs. ( 6 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Helix angle: 45° Use: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order. code: outside the norm - series 13504-535 D1

Roughing end mill 63x150 mm ( 63x150mm ), with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 63 mm Blade length l : 150mm Clamping shank d (h6) : 63mm Total length : 270mm Number of blades : 8 pcs. ( 8 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Helix angle: 45° Use: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order. code: outside the norm - series 13504-535 D1

Four-blade / four-tooth end mill 12x26 mm ( 12x26mm ) , 2 teeth through the center with a cylindrical shank, type NR-F Diameter D (k10) :12 mm Blade length l: 26mm Clamping shank d (h6) : 12mm Total length : 83mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 124608.120 ( custom production)

Four-edge / four-tooth end mill 20x38 mm ( 20x38mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type NR-F Diameter D (k10) :20 mm Blade length l : 38mm Clamping shank d (h6) : 20mm Total length : 104mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 124618.200 ( custom production)

Four-edge / four-tooth end mill 10x45 mm ( 10x45mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type NR-F Diameter D (x10) : 10 mm Blade length l : 45mm Clamping shank d (h6) : 10mm Total length : 95mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 125618.100 ( custom production)

Four-edge / four-tooth end mill 14x53 mm ( 14x53mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type NR-F Diameter D (x10) : 14 mm Blade length l : 53mm Clamping shank d (h6) : 12mm Total length : 110mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 125618.140 ( custom production)