Milling

Left-cutting / left-turning cylindrical end mill with Morse taper coarse tooth Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Other dimensions - see product description for individual variants Material: HSS Standard: CSN 222149 / 470940 Extraordinary supply

Roughing end mill with three edges / three teeth, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Helix angle: 35° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 844, ISO 1641, DIN1835B Usage: For machining in 3 axes Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 MPa Type NR-F : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it functions as a roughing and finishing tool. Order no. code - series: 104418P and 105418P

Front end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Head angle: 20° Other dimensions - see the attached catalog sheet Material: HSS Standard: CSN 222148 / DIN 845 / ISO 1641 / DIN 228 A Type W : For machining soft tools, e.g. aluminum and non-ferrous metals. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 Mpa Aluminum, Al-Si alloys up to 500 Mpa Order no. number - series: 410940 and 411940

Front end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Head angle: 22° Other dimensions - see the attached catalog sheet Material: HSSCo5 Standard: CSN 222148 / DIN 845 / ISO 1641 / DIN 228 A Type W : For machining soft tools, e.g. aluminum and non-ferrous metals. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 Mpa Aluminum, Al-Si alloys up to 500 Mpa Order no. number - series: 410245 and 411245

Short end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Brow angle: 6° Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: DIN845B / 440248 Type H : Intended for milling (finishing) materials of medium to higher strength (up to 1200 Mpa). Machining Ra 3.2; exceptionally even 1.6. Use in materials: Tool and refined steels up to 1100 MPa Cr-Ni alloys up to 1500 MPa Titanium and titanium alloys up to 1250 MPa Order no. number - series: 440248 and 441248

Milling mandrel for clamping a milling head / milling cutter with an external thread Clamping cone: according to the selected variant Thread size for the cutter: according to the selected variant Length from the collar to the clamping part of the cutter: according to the selected variant Other dimensions: see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 32 with higher clamping accuracy Size: 3 mm Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 470EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precise collet ER 32 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precision collet ER 32 with two cooling channels in the middle / at the drilling - for drills and milling cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470ECC Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precision collet ER 32 with cooling channels - for drills and cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EC Usage : For tools (drills and cutters, countersinks, etc.) without internal cooling Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Replacement Inserts VBD TPUN 160308 IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Cat. No .: 3308119