Milling

Front pin semi-coarse tooth cutter with Morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSSCo5 Standard: CSN 222142 / DIN 845 / ISO 1641 / DIN 228 A Type N : Universal use. Suitable for materials up to 900 Mpa strength. Use in materials: Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Stainless steel up to 850 MPa Cr-Ni alloys up to 850 MPa Order no. number - series: 420245 and 421245

Interrupted edge end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Other dimensions - see the attached catalog sheet Material: HSS Standard: CSN 222142.1 / 422940 Extraordinary supply

Front roughing end mill with Morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSS Standard: CSN 222142 / DIN 845 / ISO 1641 / DIN 228 A Type N : Universal use. Suitable for materials up to 900 Mpa strength. Type CB : Chip breaker - universal use for roughing. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Order no. number - series: 422940 and 423940

Front semi-coarse roughing end mill with Morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSSCo5 Standard: CSN 222142 / DIN 845 / ISO 1641 / DIN 228 A Type N : Universal use. Suitable for materials up to 900 Mpa strength. Type CB : Chip breaker - universal use for roughing. Use in materials: Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Stainless steel up to 850 MPa Cr-Ni alloys up to 850 MPa Order no. number - series: 422245 and 423245

Front end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: DIN 845B, DIN845C / ISO 1641 / DIN 228 A / DIN 2207 Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), machining Ra 12.5 and rougher. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Stainless steel up to 850 MPa Order no. number - series: 424248 and 425248

Left-hand cutting end mill with Morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Other dimensions - see product description for individual variants Material: HSS - unless otherwise stated Standard: CSN 222143 / 480940 / 481940 Extraordinary supply

Front end mill with fine-tooth Morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 25° Other dimensions - see the attached catalog sheet Material: HSS Standard: CSN 222146 / 430940 Extraordinary supply

Three-edged / three-tooth end mill, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222132 ( CSN 22 2132 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 230417

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Other dimensions - see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

Left-hand / left-hand cylindrical end mill with Morse taper, fine tooth Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 25° Other dimensions - see product description for individual variants Material: HSS Standard: CSN 222147 / 490940 / 491940 Extraordinary supply

Coarse-toothed end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Other dimensions - see product description for individual variants Material: HSS Standard: CSN 222148 / 410940