Milling support for lathe 70x150mm
Current price:
507,76 €
with VAT
419,64 € without VAT
On request
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000310634
- Brand:
- Česká výroba 2012
- Warranty:
- 24 months
- Code:
- UNIV-FS
Product information
MN80 Lathe Milling Machine Lathe
Chinese
Clamping surface 70x150mm
Axial displacement approx. 80mm
1 piece nonius 0,02mm, 1x turning = 1mm
Slot: 3xT10
Distance from the rear edge to the hole axis: 32.8mm, hole 10mm
Bronze nut
Adjustable support for the base of the locking system
Adjustable axial clearance of the bolt bearing
The surfaces of the product are carefully angled and ground, all sliding function surfaces are scraped
Material: Angle holder and T-shaped table with C-25 gray cast iron
Nonius, handle and fastener is made of steel
Screw feed is of strength steel
Usage: MN80 lathe, or even for other lathes.
If you want to use support on another lathe (Rotwerk, Asist, Proma, Quantum, Bernardo and others), please send us a dimensioned drawing of your lathe's knife holder.
a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course.
The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.
Chinese
Clamping surface 70x150mm
Axial displacement approx. 80mm
1 piece nonius 0,02mm, 1x turning = 1mm
Slot: 3xT10
Distance from the rear edge to the hole axis: 32.8mm, hole 10mm
Bronze nut
Adjustable support for the base of the locking system
Adjustable axial clearance of the bolt bearing
The surfaces of the product are carefully angled and ground, all sliding function surfaces are scraped
Material: Angle holder and T-shaped table with C-25 gray cast iron
Nonius, handle and fastener is made of steel
Screw feed is of strength steel
Usage: MN80 lathe, or even for other lathes.
If you want to use support on another lathe (Rotwerk, Asist, Proma, Quantum, Bernardo and others), please send us a dimensioned drawing of your lathe's knife holder.
a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course.
The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!