Milling

Carbide (TK) milling cutter for grooving Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Progressive groove milling, hole drilling Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) grooving cutter Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Slotting cutter, the cutter has 1 cutting edge through the middle Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) slot milling cutter - uncoated Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated Usage: Progressive groove milling, hole drilling Suitable for milling steel and mild adhesive steels (aluminum, copper, brass, etc.) Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 55° Clamping shank: see attached catalog sheet Carbide: nano fine grain carbide Coating: without coating Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Progressive milling of grooves, drilling of holes Suitable for milling steel and soft sticky steels - aluminum, copper, brass, etc. Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Taper milling mandrel for drill chuck (mandrel to chuck), female thread type Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Cone for the header: according to the selected variant Clamping of the drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper.

Taper milling mandrel for drill chuck (mandrel to chuck), type with internal thread in Morse taper and external thread for chuck clamping Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Thread for the header: according to the selected variant Clamping of a drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper. Use: for clamping a drill chuck, it can also be used to clamp something else.

Carbide (TK) milling cutter for universal milling - corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of blades: 4 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal long milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal milling - long corner Number of edges: 3bř. Diameter of the working part: according to the selected diameter, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo