Metric

Velcro polishing pad with a diameter of 115 mm

55mm

Wooden Gripping Stick 75mm Gripping Diameter 75mm

Soft Velcro with 115 mm Velcro fastener Abrasive Cutter Carrier. Thorough cuts, polishing lambs and felt polishing wheels can be done. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Varnishing spray gun with plastic top container. 3.5 - 4.8 bar. Contains a 1.4mm nozzle. Container contents 600ml 1/4 "G 1/4" accessories -

Metal tool box with seven drawers, castors Height of case (without castors) 85cm, width 68cm, depth 46cm Handle can be placed from the right or left side Seven drawers. Five Drawer Widths: Width 57cm, Height 6cm, Depth 40cm Larger Drawers Dimensions: Width 57cm, Height 14cm, Depth 40cm Maximum Drawer Drawers: 40cm In each drawer and top swap the part is an anti-slip pad

Set of HSSE OX chip breaker machine taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead-in teeth: B (4-5 teeth) Usage - through hole: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-081015-0000

Set of machine taps with spiral groove / set of spiral taps HSSE OX The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead teeth: C (2-3 teeth) Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-085015-0000

Set of machine taps with chip breaker HSSE 800X The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: TiN Number of lead-in teeth: B (4-5 teeth) Usage - through hole: 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N/mm2 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 * Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) Cat. no.: Z2-113X15-0310

Set of machine taps with spiral groove / set of spiral taps HSSE 800X Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 up to) Tolerance: ISO2 / 6H Coating: TiN - Titanium Nitride Number of lead teeth: C(2-3 teeth) Application - blind hole: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 - Food grade stainless steel(does not increase thread, holds prescribed tolerance) Cat. No: Z2-513X15-0310

Set of machine taps with chip breaker HSSE-PM FAN The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank" - common from M12 upwards) Tolerance: ISO2 / 6H Material : HSSE-PM (sintered cobalt steel) Coating: TiAlSiN Number of lead-in teeth: B (4-5 teeth) Usage - through hole: 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 6.4: Bronze and aluminum up to 1200N/mm2 7.4 : Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2 : Thermoplastics and hardened plastics Cat. no.: Z4-115001-0312

Set of machine taps with chip breaker HSSE-PM HL Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) Tolerance: ISO2 / 6H Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Number of lead teeth: B(4-5 teeth) Application - through hole: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can also be used for emergency threading of hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power. Contact the Company: Kat. No .: Z4-118M15-0310