Metric reduction

Metric reduction - insert for metric taper for Czech-made lathe spindles External metric cone: according to the selected variant Internal Morse cone: according to the selected variant Through, without internal thread Other dimensions: see product description for individual variants The metric cone has a conicity of 1:20 Usage: - lathe - also a milling machine in case of emergency The bushing is punched out of the machine spindle with a rod made of a softer material. The back of the case is modified for this method. The external and internal taper does not go all the way to the end = no burrs are created.

Metric Reduction 24K MK2 Metric Cone for Lathe Spindle Max. diameter - cylindrical part: 30,5mm (x height 19,8mm) Overall length: 69mm Use: - lathe Suitable for lathes: MN80

Metric reduction - insert for metric taper, for machines with UNC spindle thread 5/8" x 11 turns per inch External taper: meter.32 (Dmax=32mm, Dmin=26.8mm - on length 108mm) Inner taper: meter.18 Reducing threaded insert has threads: external M10, internal UNC 5/8 x 11" Max. diameter : 41.7mm ( x height 20mm) Total length : 130mm The metric cone has a taper of 1:20

Old Czech type of metric reduction bushing for milling machine - with upper transition connecting screw Outer cone: metric size 32 Inner cone : MK3 Transition screw threads: W5/8" / M12 Standard: corporate standard Dmax: 30mm Total length: 140mm Usage: For clamping cutters and tools with MK3 taper with M12 thread Reduction comes from excess stock.

Old Czech type of metric reduction bushing for milling machine Outer cone: metric size 32 Inner cone : MK3 Pulling thread into the machine spindle: W 5/8" Standard: corporate standard Dmax: 42mm Total length: 140mm Usage: For clamping drills and other tools with MK3 cone with driver The reduction comes from excess stock.