Metric
-
Thread repair tap - metric HSS, V-Coil
Machine tap for thread repair Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 7,70 € with VAT -
Thread repair machine tap - metric HSSE, V-Coil
Machine tap with chip breaker, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 9,12 € with VAT -
Thread repair spiral machine tap - metric HSSE , V-Coil
Machine tap in a spiral, for thread repair Size of the repaired thread: according to the selected variant Form : C Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 8,87 € with VAT -
Tthread repair tap - metric HSS 6-point , V-Coil
Machine tap for thread repair in battery drills Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 4,74 € with VAT -
Thread repair forming machine tap - metric HSSE , V-Coil
Forming machine tap, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After creating a thread with this tap, it is necessary to insert a stainless steel spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 17,29 € with VAT -
Thread repair combined tap - metric HSS-G , V-Coil
Disposable tap for thread repair A drill is not needed to repair the thread - the tapper cuts the thread at once. Size of the repaired thread: according to the selected variant Material: HSS - High-speed steel Fitting: ISO1 / 4H Cuts a thread for V-Coil threaded inserts according to ISO 2 ( 6H ) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 16,46 € with VAT -
Tap for repairing spark plug thread M14x1.25 using fixed inserts, V-Coil
HexTap OS SP HexTap OS Thread Repair M 14x1,25 HexTap OS SP Thread Repair M 14x1,25 - by means of a socket wrench or an internal hexagon: Hexagon: 16mm Imbus: 4mm The first stage is used to perpendicularly push the tap, the second step cuts the thread for the fixed insert (M16x1,25) Fixed Inserts - See related products Thread Repair Instructions - see video below.
In stock37,43 € with VAT
