Metric

M3-M12 M3, M4, M5, M6, M8, M10, M12, CSN 223043 (straight groove with chip breaker) Taps: M3, M4, M5, M6, M8, M10, M12, PN 8/3044 (spiral groove) Taps for DIN 1814 Taps Material: HSSE - high-speed steel (HSS Co5)

Set of circular jaws of Czech production MINI-1 Set of die-cut tools Range: M3-M12 Set contains: Circular jaws: M3, M4, M5, M6, M8, M10, M12 Eyelet: 25mm and 38mm, inserts 38/30 and 25/20 Material: HSSE - high-speed steel (HSS Co5)

Set of quality taps and eyelets of Czech production M 0-II Set of die-cut tools Range: M2,5 - M7 Set contains: Taps and loops: M2,5, M3, M3 , 5, M4, M5, M6, M7 Tensioning rod No. 1, clamping range (square) 2-4,5mm Latching ring: 20mm plastic insert 16mm Material: NO - tool steel

M2, M5, M6, M7, M8 Torch Tensioner DIN 1814 Material: NO - Tool Steel

M3-M12 M3-M12 M3, M4, M5, M6, M8 , M10, M12 Taps for Taps No. 2, Clamping Range (Square) 2,5-7,1mm Eyelet Bracket: 38mm Plastic Insert 30mm, 25mm Plastic Insert 20mm Material: NO - Tool steel

M3-MS M3-M12 M3, M4, M5, M6, M8 , M10, M12 Taps and loops: M8x1,0, M10x1,0, M12x1,0, M12x1,5 Torque tongue DIN 1814 Lanyard: 25mm diameter) Material: NO - tool steel

M3-M12 M3-M12 M3, M4, M5, M6, M7, M8, M10, M12 Tool steel

M3-M12 M3-M12 M3, M4, M5, M6, M7, M8, M9, M10, M12 Taps and loops: M8x1,0, M10x1,0, M12x1,5, M12x1,25, M12x1,0 Torque tongue DIN 1814 Eyelet: 25mm (others not needed, stitches have the same diameter) Material: NO - tool steel

M3, M4, M5, M6, M7, M8, M10 , M12 Taps for DIN 1814 Taps Material: NO - tool steel

M3-M12 M3-M12 M3, M4, M5, M6, M8 , M10, M12 Taps for taps No. 2 Lanyard: 25mm 38mm, inserts 25/20 and 38/30 Material: NO - tool steel

Set of taps, eyes, bits and drills N 3-II, order no. 310141 Set of tapping tools Range: M3-M12 Set contains: Taps and eyes: M4x0,5, M5x0,5 M6x0, 75, M8x0.75, M8x1.0 , M9x1.0, M10x0.75, M10x1.0, M11x1.0, M12x1.0, M12x1.5, M14x1.0, M14x1.25, M14x1.5 for taps No. Shaft for taps No. 1, clamping range(four edges) 2.0-4.5mm | 2, clamping range(four edges) 2.5 -7,1mm Eye beams: 25 and 38mm Shaft bushes: 25/20 and 38 / 30mm br> A „A’SN 221121: 2,0 / 3 , 0/3, 5 / 4.5 / 5.2 / 7.0 / 7.2 / 8.0 / 9.0 / 9.2 / 10.0 / 10.5 / 11.0 / 12.5 / 12.8 mm Tap attachments ÄOSN 241151: 3,15 / 3,55 / 4 , 0 / 5,0 / 5,6 / 6,3 / 7,1 / 9,0mm Pull-out bags PN 238990: No.1 / No.2 / No.3 / No.4 < br> Material: NO - tool steel

M2-II M12-M20 M12, M14, M16, M18, M20 Taps and eyelets (including reducer) Material: NO - tool steel