Metalworking tools

Bracket, brace for clamping bi-metal crowns with diameters 14-30mm Drill bit diameter: 6,5mm Hexagon for clamping: 10mm For clamping crowns diameters 14-30mm

Bracket for bimetallic crown with diameters 32-152mm Drill bit diameter: 6,5mm Hexagon for clamping: 10mm For drilling of 32-152mm drilling crowns

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.

Velcro Velcro 125 mm Grinder Cutter. Thorough cuts, polishing lambs and felt polishing wheels can be done. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Soft Velcro with 115 mm Velcro fastener Abrasive Cutter Carrier. Thorough cuts, polishing lambs and felt polishing wheels can be done. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Velcro Soft Velcro 150 mm Abrasive Cutter Carrier. Thorough cuts, polishing lambs and felt polishing wheels can be done. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Carbide core drill / reamer / drill core is made from one piece - including shank. Diameter: 16 mm (tolerance 1mm!) Drilling depth: 25mm Clamping shank: cylindrical shank with hexagon, diameter 10mm Has powered carbide teeth that allow easier drilling with less downforce. Exact guidance is ensured by a removable guide drill with a diameter of 6 mm. The spring on the drill serves to easily remove the drilled material. The guide drill is secured with an Allen "worm". .Cutting conditions: Steel: 630-800 rpm Stainless steel: 360-450 rpm Use: Pillar drill, or manual with drills up to a diameter of approx. 40-50mm - but you need to hold the drilling axis and always keep all the blades engaged. If you do not keep all the blades engaged or you are not able to keep the drill in the drilling axis ( jerk , shocks, etc.) , the carbide cutting edge may chip - i.e. irreversible damage to the tool.

Replacement centering drill for XT-Line cabrid countersink drills Diameter: 6mm Total length: 68mm At the end there is a 5.2mm wide locking flat located from end 2 .5mm to 10mm.

Carbide core drill / reamer / drill core is made from one piece - including shank. Diameter: 18 mm (tolerance 1mm!) Drilling depth: 25mm Clamping shank: cylindrical shank with hexagon, diameter 10mm Has powered carbide teeth that allow easier drilling with less downforce. Exact guidance is ensured by a removable guide drill with a diameter of 6 mm. The spring on the drill serves to easily remove the drilled material. The guide drill is secured with an Allen "worm". .Cutting conditions: Steel: 630-800 rpm Stainless steel: 360-450 rpm Use: Pillar drill, or manual with drills up to a diameter of approx. 40-50mm - but you need to hold the drilling axis and always keep all the blades engaged. If you do not keep all the blades engaged or you are not able to keep the drill in the drilling axis ( jerk , shocks, etc.) , the carbide cutting edge may chip - i.e. irreversible damage to the tool.

Carbide core drill / reamer / drill core is made from one piece - including shank. Diameter: 20 mm (tolerance 1mm!) Drilling depth: 25mm Clamping shank: cylindrical shank with hexagon, diameter 10mm Has powered carbide teeth that allow easier drilling with less downforce. Exact guidance is ensured by a removable guide drill with a diameter of 6 mm. The spring on the drill serves to easily remove the drilled material. The guide drill is secured with an Allen "worm". .Cutting conditions: Steel: 630-800 rpm Stainless steel: 360-450 rpm Use: Pillar drill, or manual with drills up to a diameter of approx. 40-50mm - but you need to hold the drilling axis and always keep all the blades engaged. If you do not keep all the blades engaged or you are not able to keep the drill in the drilling axis ( jerk , shocks, etc.) , the carbide cutting edge may chip - i.e. irreversible damage to the tool.

Crown drill / jaw / drilling crown is made of one piece - including stopper. Diameter: 22 mm Tolerance: 1mm It has carbide teeth that allow easier drilling with less pressing force. Precision guide provides a removable guide drill with a diameter of 6mm. The drill spring serves for easy removal of the drilling material. The drill bit is provided with an allen worm. . Stopwatch has 3 flats and a diameter of 10mm.

Crown drill / jaw / drilling crown is made of one piece - including stopper. Diameter: 32 mm Home Tolerance: 1 mm Home has supplied carbide teeth that make it easier to drill a smaller pressing force. Precision guide provides a removable guide drill with a diameter of 6mm. The drill spring serves for easy removal of the drilling material. The drill bit is provided with an allen worm. . Stopwatch has 3 flats and a diameter of 10mm.