Metalworking tools

Rubber hose for tire filler, pneumatic tire gun Overall length 440 mm Hose at one end with 1/4 "G male thread, screwed into filler Second hose end is fitted with bronze end cap for car / moto valves This set is suitable for ZG-3 tires

Pressure Gauge with Rubber Hose, Tire Pressure Gauge, Double Sided Tip Range: 0-12 bar, 0-170 PSI Diameter of Manometer: 55mm, Rubber Case Hose Length with Tip: 600mm

° C Container volume: 50 cm3 Container made of high quality polycarbonate Dimensions: 145x55mm Recommended oil in the lubricator: Velocite 6 Cutting and Do not use Bearing Oil !!! Input is marked on the body of the lubricator with an arrow. Never connect the lubricant to the opposite direction!

Set of black 1-10mm drills in a black binder

Pliers holder type 5C for spindle of lathe SV-18 with taper metr.50 Outer taper: metr.50 Inner taper: 10Â ° Rear cylinder bore diameter 38.0mm Overall housing length: 85mm Material: tool steel Collets 5C can be purchased from us separately in pieces in the design: * Round * Four edges * Hexagon - see related products

Pliers holder E21SN 242145 size 25 for spindle lathe SV-18 with taper metr.50 Outer taper: metr.50 Inside Cone: 15 ° 15 ° Rear cylinder bore diameter 38.2mm Total case length: 85mm Material: tool Steel

Socket Chassis Chuck for SV18 and TOS S-28 Chucks Chucks: IUS 160mm Flange Diameter: 160mm Material: Gray Cast Iron Clamping Thread: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Chainsaws: IUS 200mm Flange Diameter: 200mm Material: Gray Cast Iron Clamping Thread: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Socket Chuck for SV18 and TOS S-28 Chucks Chucks: IUS 250mm Diameter flange: 250mm Material: Gray cast iron Clamping threads: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Support flange for SV-18 and TOS S-28 lathe Flange diameter: 200mm Material: gray cast iron Â!Vit: M68x6 The flange has a groove for securing with a pin when turning between the points.

Set of 19 left-hand ground spiral drill bits for metal with reinforced core 1.0-10.0 mm Set includes left-hand drill bits 0.5 mm each Helix angle: 36° Material: HSS Order no. : SV338LNHSS-19K

Set of 25 pcs of left ground spiral drills for metal with reinforced core 1.0-13.0 mm Set contains left drills for 0.5 mm Helix angle: 36 Â ° Material : HSS Order no. : SV338LNHSS-25K