Metalworking tools

Deer brand SA331 125 mm velcro sanding emery board Grain: according to the selected variant Fastening method: velcro Extra fine cut, suitable for fine sanding also when wet, also suitable for sanding/polishing plastic, silicone, etc.

Unused - asymmetrical double-sided angle socket cutter Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222244 / 22 2244 or its extension by custom production Resale - excess stock

Plug-in fine tooth milling cutter - cast Diameter: according to the chosen variant Height: according to the chosen variant Clamping diameter: according to the selected variant Other dimensions and fastening style - see product description for individual variants Material: HSS - cast ground cutter Standard: ČSN 222158 Usage : Structural and cast steels up to 800 MPa

Morse reduction milling cutters for taper shank drills Outer cone: according to the selected variant Inner cone: according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 MK5 = thread M20 Application: for clamping Morse taper drills, countersinks, reamers, countersinks and other Morse tools with a carrier in a milling machine that has a Morse taper in the spindle.

Asymmetric double-sided angled end mill with underturned teeth These cutters are used because of the advantage of maintaining their shape even after face grinding. This is a simplified version of the cutter ČSN 222244 - see photos Angle: according to the selected variant Diameter of the cutter: according to the selected variant Diameter of the clamping hole: according to the selected variant Corner radius: according to the selected variant Other dimensions: see product description for individual variants Material: HSS - High-speed steel Custom production, atypical size, lower sub-level of standard ČSN 222244 / 22 2244 Usage: ordinary steel and non-sticky metal alloys Characteristics of these cutters: An underturned tooth is stronger and dissipates heat better from the cutting edge. Due to the angle of the back and the straight face, there is a significantly greater cutting resistance when cutting directly than with ČSN 222244 cutters. They are easily resharpened Resale - excess stock, unused

APMT 15T3 PDR - F56 WMG40 Cat. No. 0412827788

Abrasive wheel for stand / machine sander Diameter: 200mm Wheel strength: 20mm Hole: 32mm Grit: 100 Abrasive type: 49C - carbide green silicon, ceramic binder Hardness: J Structure: 9 Speed: 40 m/s - You can find the way of marking discs in the attached table. Recommended use: SIC carbide, cast iron, non-ferrous metals Possible use: steel up to 67HRC, stone, titanium alloys, stainless steel, plastic, fiberglass Suitable for grinding lathe knives with solder plate Cat. no.: 556578

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSE-PM, AlTiN polish Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 124517 and 125517

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (cylindrical): according to the selected variant Clamping shank length: see description for variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Two-stage conical 2-fl. / double-edged / countersink Number of edges: 2 Blade angle: 90st. Other dimensions - see attached photo. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant

Machine insert reamer for holes ( holes ) Dimensions and tolerance: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS The teeth are in a left helix 7° Clamping hole with taper 1:30 Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 For clamping, holders are used: ČSN 241210 / DIN 217 Use: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastic materials. The reamers are Czech-made, unused, from over-standard stock. Only a limited selection. If you did not find the reamer you were looking for, write or call and we will check.

Machine plug-in reamer for holes (holes) Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS The teeth are in the left helix 7 ° Clamping hole with 1:30 taper Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. If you haven't found the reamer you're looking for, type or call, we'll check.