Metalworking tools

Fine-tooth cylindrical end mill Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: replacement for ČSN 222138 / production standard Zbrojovka Vsetín

Extra long end mill with four edges / four teeth, with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: 79mm Other dimensions - see product description for individual variants Helix angle: 30° Head angle: 12° Material: HSSCo5 (contains 5% cobalt) Standard: DIN1835B, extension of standard ČSN 222132 Usage: Type N - for materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code: series 121215E

Left-cutting angled one-sided end mill with underturned teeth These cutters are used because of the advantage of maintaining their shape even after face grinding. This is a simplified version of the cutter ČSN 222254 - see photos Angle: according to the selected variant Diameter of the cutter: according to the selected variant Diameter of the clamping hole: according to the selected variant Corner radius: according to the selected variant Other dimensions: see product description for individual variants Material: HSS - High-speed steel Custom production, atypical size, lower sub-level of standard ČSN 222254 / 22 2254 Usage: ordinary steel and non-sticky metal alloys Characteristics of these cutters: An underturned tooth is stronger and dissipates heat better from the cutting edge. Due to the angle of the back and the straight face, there is significantly greater cutting resistance when cutting directly than with ČSN 222254 cutters. They are easily resharpened Resale - excess stock, unused

Four-edged roughing end mill, four-edged / four-toothed with weldon surface Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Number of blades: 4 Material: HSSCo8 - High speed steel + 8% cobalt Coating: TiN - Titanium Nitride

Mini boring knife for front internal recesses, with internal cooling Clamping diameter (D): according to the selected variant Recess width (B): according to the selected variant Employment length (L1): according to the selected variant Other dimensions - see the attached catalog sheet Coating: BXC - see attached catalog sheet Suitable for machining steels, stainless steels, cast iron, aluminum, superalloys and hardened steels

Conical 2-fl. / double-edged / countersink Number of edges: 2 Blade angle: 90st. Other dimensions - see attached photo. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant

Quick-clamping tapping head without length compensation for attachments for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant This type (SF) is without length compensation! The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Turning knife straight with HSS cutting edge Clamping square: according to the selected variant Other dimensions - see product description for each variant Standard: DIN4900, all sizes are soldered Blade material: 19 830 - HSS steel suitable for nitriding. For highly stressed tools for machining materials with medium and higher strength, especially for tools requiring particularly good toughness Knife body material: 12 061

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Order no. code - series: 124518 and 125518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR-P : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. Order no. code - series: 124518P and 125518P

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518 and 129518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR-F: For machining materials with medium to higher strength (up to 1200 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the functions of a roughing and finishing tool. Order no. code - series: 128518P and 129518P