Metalworking tools

Front holder for interchangeable inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Marking of plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.

Front holder for inserts / knife for external turning, thumb clamping via clamp from above Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Front holder for interchangeable inserts / knife for external turning, thumb clamping via clamp from above Clamping dimensions: according to the selected variant Marking of plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.

Precision collet ER 40 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 472EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 40mm Length: 46mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

KLINGSPOR brand sanding emery board Diameter: according to the selected variant Grain: according to the selected variant Usage: For an angle / vibrating sander with suction Fastening method: velcro

End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 120517 and 121517

Symmetrical angular socket cutter for prismatic lines Angle: 45° Diameter of cutter (js 16): 40mm Width (js14) : 10mm Diameter of the clamping hole (H7): 10mm Other dimensions - see the attached catalog sheet Material: HSS or HSSCo5 - depending on the selected variant Standard: ČSN 222254 / 22 2254, DIN842 Cat. No. - series: 853270 and 853275V

Cylindrical end mill with four edges, four teeth Diameter: 2mm Blade length: 8mm Total length: 34 mm Clamping diameter: 4mm Material: HSS - High-speed steel Standard: ČSN 222136 / CSN 22 2136

Cylindrical end mill four-edged, four-toothed, semi-coarse-toothed Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Helix angle 25° (35°) Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222132 / 141200

End mill, with cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 844, ISO 1641, ČSN 222132 Usage: For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140208 and 140218

End mill with a long cutting edge, with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 844, ISO 1641, ČSN 222132 Usage: For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 141208 and 141218

One-sided angle socket cutter with corner radius Angle: according to the selected variant Diameter of the cutter (js 16): according to the selected variant Width (js14): according to the selected variant Diameter of the clamping hole (H7): according to the selected variant Radius on the edge: (depending on the selected variant) Other dimensions - see the attached catalog sheet Material: HSS - High-speed steel Standard: ČSN 222242 / 22 2242, DIN 1824 A Cat. No. - series: 852570