Metalworking tools

Left holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Left holder for replaceable blades for external thread SEL Knife for external thread turning Tread knife holder, for threaded slices Clamping dimensions: according to the selected variant For plates marked: according to the selected variant Other dimensions - see product description for individual variants The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally.

Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228

Threaded eyelet with jaws for NPTF conical thread (it is a sealing NPT thread without the need to use Teflon tape / glue, etc.) Size: according to the selected variant Ascent: according to the chosen variant Thread taper: 16 Material: HSS - high-speed steel Standard: ASME B1. 20.3 Usage: soft structural steels up to 500 N/mm2, automatic steels, structural steels and refined steels with a strength of up to 800 N/mm2, copper alloys, alloyed aluminum Adjustable design - by tightening the screws in the shaft, it is possible to adjust the diameter of the resulting thread. If you do not overstretch the screws in the beam and tighten only so that the jaw does not fall out of the beam, it works like an ordinary round jaw with a full profile.

Front holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Front holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Front holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Front holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Front holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Front holder for interchangeable inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Marking of plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.

Front holder for interchangeable inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Marking of plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.

Front holder for interchangeable inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Marking of plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.