Metalworking tools

Unused face copying roughing cylindrical cutter, monolith Diameter: according to the selected variant Blade length: according to the selected variant Clamping shank - ISO steep taper: according to the selected variant Other dimensions - see product description for individual variants Material : HSSCo5 ( HSSE ) The milling cutter comes from excess stock, unused, original packaging. Order no. no. / standard: 422365 / 423365 / ČSN 222299.13

Clamping collet sleeve with ISO taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note : * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm Standard: ČSN 24 1490 Usage : Milling tool - for clamping milling cutters, drills and other tools with a cylindrical shank It is an old Czech design. We recommend switching to collet ER clamps and ER collets.

Clamping collet sleeve with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note : * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1492 Usage : Milling tool - for clamping milling cutters, drills and other tools with a cylindrical shank It is an old Czech design. We recommend switching to collet ER clamps and ER collets.

Clamping collet series: ER 40 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 472E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 40mm Length: 46mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Right holder for replaceable blades for external thread SER Knife for external thread turning Tread knife holder, for threaded slices Clamping dimensions: according to the selected variant For plates marked: according to the selected variant Other dimensions - see product description for individual variants The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally.

KLINGSPOR brand sanding emery board Diameter: according to the selected variant Grain: according to the selected variant Usage: For angle grinder Fastening method: velcro

Unused - symmetrical one-sided angle socket cutter Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222240 / 22 2240 Resale - excess stock The milling cutter does not have a recess for the screw - the bottom cannot be milled.

Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK4Internal thread of collet: M16 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)

Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228

One-sided beveled disc for sanding saw bands - for stand / machine sander, type 96A Diameter: according to the selected variant Disc width: according to the selected variant Clamping diameter: according to the selected variant Grain: according to the selected variant Hardness: according to the selected variant Disc structure: according to the selected variant Binder type: V (ceramic) Revolutions: 40 (i.e. 40 m/s) * You can find more about the hardness and structure in the attached disc marking table. Abrasive type: 96A - artificial brown corundum (grey color), ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC

Circular thread dies Thread type: NPT (National Pipe Thread) - American tubular inch thread with conical profile Conicity: 1:16 Pitch: in numbers of turns per inch Top angle: 60 ° Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ANSI / ASME B1.20.1. , DIN24230 Usage: mild structural steels up to 500 N / mm2, free-cutting steels, structural steels and heat-treated steels up to 800 N / mm2, copper alloys, aluminum alloy

Left holder for inserts / knife for external turning, clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.