Metalworking tools

Straight turning knife 60 ° with HSS cutting edge Clamping square: according to the selected variant Other dimensions - see product description for each variant Standard: DIN4951 / replacement for ČSN 223516/22 3516, all sizes are soldered Blade material: 19 830 - HSS steel suitable for nitriding. For highly stressed tools for machining materials with medium and higher strength, especially for tools requiring particularly good toughness Knife body material: 12 061

3-jaw tap chuck Clamping (inner B cone or outer morse taper): according to the selected variant Number of jaws: 3 + square clamping Other dimensions - see description for individual variants Tightens by turning the threaded head in which there are three jaws, then the enclosed Allen key and two internal stop jaws for attaching the square shank of the tap.

Double-jaw chuck with Allen key for firm clamping of taps Clamping range: according to the selected variant Clamping cone (internal): according to the selected variant Other dimensions - see the description of the selected variant We recommend use from M12, for smaller taps use a classic 3-jaw chuck, or a three-jaw chuck with square clamping - type VTA

End mill, 1 tooth through the center with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN1835 A / DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 120508 and 120518

Circular thread dies Thread type: NPT (National Pipe Thread) - American tubular inch thread with conical profile Conicity: 1:16 Pitch: in numbers of turns per inch Top angle: 60 ° Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ANSI / ASME B1.20.1. , DIN24230 Usage: mild structural steels up to 500 N / mm2, free-cutting steels, structural steels and heat-treated steels up to 800 N / mm2, copper alloys, aluminum alloy

End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 121518

End mill, 2 teeth through the center with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN 844, ISO 1641 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140608, 140618 and 141618

End mill with semicircular edges, four-edged, four-toothed Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Helix angle: 15° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: PN 222291, DIN 1889, ISO 3940 Cat. number - series: 530718 and 531718

Right holder for inserts / knife for external turning, clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Right holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Right holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Right holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.