Metalworking tools

Turning insert VBD WNMG 060408 F3P IC830 Radio 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type F3P: for common and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 3328799 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD WNMG 080404 F3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type F3P: for common and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 3328802 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080408 F3P IC830 Radius 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type F3P: for common and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 3328803 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD WNMG 060404 M3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328808 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 060408 M3P IC830 Radio 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328809 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080404 M3P IC830 Radio 0,4mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328811 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080408 M3P IC830 Radius 0,8mm Coating: PVD, AlTiN TiN Series IC830: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type M3P: For medium engagement conditions, for machining steel, good chip removal, small cutting forces, smooth clean surface. Contact the Company: Kat. Ä. : 3328812 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Forming insert for UT- holders Insert width : according to the selected variant Edge tolerance: C11 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material: HSSE-PM (sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Ground radeco with an angle for cutting trapezoidal threads / trapezoidal turning knife Ascent: according to the chosen variant Knife diameter: according to the selected variant Apex angle: 30° Other dimensions - see drawing Clamping - through the flat or behind the cylindrical diameter - see the main photo of the product Material: HSS or HSSCo5 - see product description for individual variants Suitable for cutting trapezoidal threads with a pitch of 2 mm Custom production of the Czech Republic

Set of professional exchangeable tips with morse taper The set includes extensions as specified in the photos for this product Morse cone: according to the selected variant Throwability: 0.010 mm Other dimensions - see product description for individual variants MORSE taper shank ČSN 220420, DIN 228, ISO 296 without clamping thread. Accessories Set of replaceable inserts (a-g) and ejection fork Standard: ČSN 24 3326 The set is delivered in a wooden or plastic box

3bř. conical countersink made of cobalt high-speed steel, finely ground with CBN disc Number of edges: 3 Blade angle: 90st. Maximum diameter: according to the selected variant Other dimensions - see enclosed catalog sheet Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: HSS-XE - high-alloy cobalt high-speed HSSE steel (68 HRC) Usage: Alloy steel with tensile strength up to 1100N / mm2 Stainless steel with tensile strength up to 900N / mm2 Gray cast iron Aluminum alloys with silicon content> 10% Copper, brass, plastics Features: Excellent chip evacuation, cutting edge, resulting surface without scratches, excellent tool-hole centering The countersink grooves are ground with a CBN wheel, which makes the cutting edge sharper and smoother compared to conventional countersinks where the grooves are milled.

Long image attachment - square punch Size of attachment / for imaging heads: according to the selected variant Size of the square: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These long imaging extensions can only be clamped and imaged correctly in an adjustable imaging head type G12A. With the ordinary G12 head, it is not possible to adjust the imaging depth, and the attachment or the imaging head may be damaged. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.