Metalworking tools

Grinded radeco with a 60° angle for cutting threads Knife diameter: according to the selected variant Slope: any metric, 60° Other dimensions - see drawing Clamping - through the flat or behind the cylindrical diameter - see the main photo of the product Material: HSS or HSSCo5 - see product description for individual variants Suitable for cutting threads M, Mf, UNC, UNF, UNEF, UNS, UN, NPT and other threads with a peak angle of 60° Custom production of the Czech Republic

Mini profile 90° knife for face machining / boring knife with internal cooling Clamping diameter (D): according to the selected variant Employment length (L1): according to the selected variant Radius on the edge (R): according to the selected variant Other dimensions - see the attached catalog sheet Coating: BXC - see attached catalog sheet Suitable for machining steels, stainless steels, cast iron, aluminum, superalloys and hardened steels

Countersink with guide pin for cap screws Diameter of countersink x Diameter of guide pin: according to selected variant Clamping shank: cylindrical or with Morse taper - according to the selected variant Material: HSS Standard: ČSN 22 1612 / CSN 22 1612 Use for countersinking holes for 180 ° socket head cap screws in common materials.

Rotating tip for exchangeable attachments / without exchangeable inserts Morse cone size: according to the selected variant Other dimensions - see product description for individual variants Standard: ČSN 243326 The packaging does not include attachments, these are purchased separately - see the attached photo.

Set of professional interchangeable tips Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Standard: ČSN 24 3326 The set is delivered in a wooden or plastic box

Special collet for clamping taps into a VTA reverse tap with torque coupling Clamping range of the collet: see label for individual variants Diameter and other dimensions: see label for individual variants To two collets fit each Vertex VTA thread cutter: VTA7-JT6 thread cutter: FC-10 (2.5-4.5mm) and FC-11 (4.5-6.5mm) collets Tap cutter VTA12-JT6 : collet FC-20 (4.0-7.0mm) and FC-21 (7.5-10.0mm) Tap cutter VTA20-M20 : collet FC-30 (8.0 -12.0mm) and FC-31 (14.0-19.0mm)

Milling mandrel for clamping a milling head / milling cutter with an external thread Clamping cone: according to the selected variant Thread size for the cutter: according to the selected variant Length from the collar to the clamping part of the cutter: according to the selected variant Other dimensions: see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Clamping collet series: ER 32 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 470E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 32 with higher clamping accuracy Size: 3 mm Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 470EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 32mm Length: 40mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precise collet ER 32 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precision collet ER 32 with two cooling channels in the middle / at the drilling - for drills and milling cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470ECC Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precision collet ER 32 with cooling channels - for drills and cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 470EC Usage : For tools (drills and cutters, countersinks, etc.) without internal cooling Dimensions of the collet: Diameter: 32mm Length: 40mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.