Metalworking tools

Left-cutting / left-turning cylindrical end mill with Morse taper coarse tooth Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Other dimensions - see product description for individual variants Material: HSS Standard: CSN 222149 / 470940 Extraordinary supply

Circular thread dies Thread type: Whitworth - BSF (British Standard Whitworth - Fine) Pitch : in numbers of strokes per inch Top angle: 55 ° Material: HSS - High speed steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies with chip breaker Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies with chip breaker Thread type: UNF - Unified Fine - American inch thread with fine pitch Climb: in numbers of strokes per inch; UNF - gentle climb Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - High Speed Steel Standard: DIN EN22568, ANSI ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Cup grinding disc for stand/machine sander, type 49C Diameter: according to the selected variant Disc width: according to the selected variant Clamping diameter: according to the selected variant Abrasive height (in the recess): according to the selected variant Width of the disc at the clamping point: according to the selected variant Grain: according to the selected variant Hardness: according to the selected variant Disc structure: according to the selected variant Binder type: V (ceramic) Speed: 40 m/s * You can find more about the hardness and structure in the attached disc marking table. Abrasive type: 49C - green silicon carbide, ceramic binder Recommended use: carbide + SIC, cast iron Possible use: stainless steel, stone, non-ferrous metals, plastic, fiberglass

Threaded eye with jaws / threaded eye with jaws Thread type: BSF (British Standard Whitworth - Fine), fine British whitworth thread Standard: DIN 223 Also complies with standard: DIN EN 22568 Material: HSS - High speed steel

Roughing end mill with three edges / three teeth, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Helix angle: 35° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 844, ISO 1641, DIN1835B Usage: For machining in 3 axes Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 MPa Type NR-F : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it functions as a roughing and finishing tool. Order no. code - series: 104418P and 105418P

Front end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Head angle: 20° Other dimensions - see the attached catalog sheet Material: HSS Standard: CSN 222148 / DIN 845 / ISO 1641 / DIN 228 A Type W : For machining soft tools, e.g. aluminum and non-ferrous metals. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 Mpa Aluminum, Al-Si alloys up to 500 Mpa Order no. number - series: 410940 and 411940

Front end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Head angle: 22° Other dimensions - see the attached catalog sheet Material: HSSCo5 Standard: CSN 222148 / DIN 845 / ISO 1641 / DIN 228 A Type W : For machining soft tools, e.g. aluminum and non-ferrous metals. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 Mpa Aluminum, Al-Si alloys up to 500 Mpa Order no. number - series: 410245 and 411245

Machine Thread Repair Tap: UNF 5/16 " Gradient: 24 Strokes per inch Form: D Material: HSS (High-Speed ??Steel) Dimensions according to enclosed photos. For threaded inserts according to tolerance 3B UNC 5 / 16x24 !!! Thread cut with this tap has tolerance 2B UNC and UNF taps below diameter 1 / 4 "are numbered 0 to 12 UNF - Unified US inch thread, fine pitch, top angle is 60 ° (same as metric)

Short end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Brow angle: 6° Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: DIN845B / 440248 Type H : Intended for milling (finishing) materials of medium to higher strength (up to 1200 Mpa). Machining Ra 3.2; exceptionally even 1.6. Use in materials: Tool and refined steels up to 1100 MPa Cr-Ni alloys up to 1500 MPa Titanium and titanium alloys up to 1250 MPa Order no. number - series: 440248 and 441248

Forming insert for UT- Insert width: according to the selected variant Edge tolerance: P9 - for exact dimension see product description within individual variants Version with chamfering: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSSE-PM (sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.