Metalworking tools

External grooving lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223731 / CSN 22 3731, DIN4981, DIN4981L, ISO7 L Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

External grooving lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223731 / CSN 22 3731, DIN4981, DIN4981L, ISO7 L Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Mini profile / boring knife with internal cooling Clamping diameter (D): according to the selected variant Employment length (L1): according to the selected variant Radius on the edge (R): according to the selected variant Other dimensions - see the attached catalog sheet Coating: BXC - see attached catalog sheet Suitable for machining steels, stainless steels, cast iron, aluminum, superalloys and hardened steels

Reversible tapping head / reversing tap Clamping range: according to the selected variant Clamping shank (cylindrical): according to the selected variant Other dimensions - see the description for each variant Type K1 is with a drill chuck, types K2, K3 and K4 are with clamping behind the stones After cutting the set depth, the speed will change The tap is without a torque coupling, ie it does not protect the tap from bending. Instructions for use - see attached PDF

Machine reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS or HSSCo5 - according to the selected variant Teeth in left helix 7 ° with even pitch. standards: ČSN 221430 / CSN 22 1430 / DIN212 Form B, D (ISO521) Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. If you haven't found the reamer you're looking for, type or call, we'll check.

Left-hand BSP machine tap, straight groove, for pipe thread Thread type: English pipe inch whitworth thread - British Standard Pipe thread Dimension: according to the selected variant Peak angle: 55° Form: C Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN 5156, DIN ISO 228 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For manual and machine application For through and blind holes

Set of professional interchangeable tips Clamping morse taper: according to the selected variant Individual content of the set and other parameters - see the description for each variant Material: tool steel - designation according to DIN: 25CrMo4, hardened, ground The set is delivered in a wooden or plastic box

Three-edged / three-tooth end mill, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222132 ( CSN 22 2132 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 230417

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Other dimensions - see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

Left-hand / left-hand cylindrical end mill with Morse taper, fine tooth Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 25° Other dimensions - see product description for individual variants Material: HSS Standard: CSN 222147 / 490940 / 491940 Extraordinary supply

Coarse-toothed end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 45° Other dimensions - see product description for individual variants Material: HSS Standard: CSN 222148 / 410940