Metalworking tools

Left holder for inserts / knife for external turning, clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

Front pin semi-coarse tooth cutter with Morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSSCo5 Standard: CSN 222142 / DIN 845 / ISO 1641 / DIN 228 A Type N : Universal use. Suitable for materials up to 900 Mpa strength. Use in materials: Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Stainless steel up to 850 MPa Cr-Ni alloys up to 850 MPa Order no. number - series: 420245 and 421245

Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle: 55° Material: HSS - High Speed Steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Thread eye with jaws / threaded eye with jaws Thread type: W, or BSW (British Standard Whitworth) Rise: in steps per inch (basic) Apex angle: 55° Other dimensions - see the attached catalog sheet Standard: DIN 223, BS 84 Also corresponds to the standard: DIN EN 22568 Material: HSS - High-speed steel

Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle: 55° Material: HSS - High Speed Steel Standard: DIN 223 / DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Interrupted edge end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Other dimensions - see the attached catalog sheet Material: HSS Standard: CSN 222142.1 / 422940 Extraordinary supply

Circular thread dies Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies Thread type: UNF - Unified Fine - American inch thread with fine pitch Climb: in numbers of strokes per inch; UNF - gentle climb Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - High Speed Steel Standard: DIN EN22568, ANSI ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies Thread type: UNEF - Unified Extra Fine - American inch thread with extra fine pitch Pitch: in numbers of strokes per inch; UNEF - extra fine pitch Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ANSI ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies with chip breaker Thread type: Whitworth - BSW (British Standart Whitworth) Climb: in numbers of strokes per inch; BSW - basic climb (rough) Top angle: 55 ° Material: HSS - High speed steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Cup grinding disc for stand/machine sander, type 98A Diameter: according to the selected variant Disc width: according to the selected variant Clamping diameter: according to the selected variant Abrasive height (in the recess): according to the selected variant Width of the disc at the clamping point: according to the selected variant Grain: according to the selected variant Hardness: according to the selected variant Disc structure: according to the selected variant Binder type: V (ceramic) Speed: 32 m/s * You can find more about the hardness and structure in the attached disc marking table. Abrasive type: 98A - light pink artificial corundum, ceramic binder Recommended use: steel up to 55 HRC, stainless steel Possible use: steel class 11