Metalworking tools

Abrasive diamond paste in a jar Grain: according to the selected variant Weight of the paste: 20g The color of the paste is only the color of the binder - it may vary according to the manufacturer, the abrasive is colorless. Usage - see attached photo - table. Diamond polishing and lapping pastes consist of diamond powder and a binder that has a lubricating and cooling effect. The use of diamond pastes instead of abrasives makes it possible to increase the lapping speed by 2-5 times and thus improve the cleanliness of the machined surface. We recommend using diamond paste for lapping and polishing cemented carbides, ceramics, quartz and other harder materials. In the production of gauges, pressing molds, microgrinding of components, heating devices. They are used in the engineering industry for various types of materials for finishing operations of functional surfaces of tools, finishing grinding of molds, pressing tools, molds and nozzles, lapping tappets and valve seats, lapping very precise parts of hydraulic, pneumatic and fuel systems. Polishing metal parts, but can also be used to polish stone and semi-precious stones. Diamond pastes are washable with water or organic solvents: * Kerosene, petrol, low-viscosity mineral oils, alcohol and others can be used as organic solvents. * Water-washable pastes are recommended for machining non-metallic materials. * Universal pastes are suitable for machining both metallic and non-metallic materials.

Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Right holder for inserts / knife for external turning, clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Sponge for sanding Grain: according to the selected variant Dimensions: Width: 70mm Length: 100mm Height: 25mm Usage: wood, soft metals (aluminium, zinc, copper...), plastics

Unused - symmetrical double-sided angled end mill Angle: according to the selected variant Diameter of the cutter: according to the selected variant Other dimensions - see product description for solid variants Material: HSS - High-speed steel Standard: ČSN 222250 / 22 2250 Resale - excess stock

Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Climb: in numbers of strokes per inch; BSW - basic climb (rough) Top angle: 55 ° Material: CS - Carbon tool Steel Standard: DIN223, DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges From excess stock (brands ZONA, SIGMA, ŠKODA, etc.) from the company's dispensary Unused or only slightly used.

Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK3 Internal thread of collet: M12 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)

Cup grinding disc for stand/machine sander, type 99BA Diameter: according to the selected variant Disc width: according to the selected variant Clamping diameter: according to the selected variant Abrasive height (in the recess): according to the selected variant Width of the disc at the clamping point: according to the selected variant Grain: according to the selected variant Hardness: according to the selected variant Disc structure: according to the selected variant Binder type: V (ceramic) Speed: 32-40 m/s (see product description for individual variants) * You can find more about the hardness and structure in the attached disc marking table. Abrasive type: 99BA - artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron

Universal use on all materials Abrasive disc with shank Diameter: according to the selected variant Abrasive height: according to the selected variant Grain: according to the selected variant Clamping shank: 6mm The abrasive lamellas on the pad are fan-shaped, radially around the axis of the tool. Due to their flexibility, they ideally adapt to the shape of the workpiece. The bodies are suitable for fine grinding of radii, processing of small and hard-to-reach surfaces. The best performance is achieved by lamellar bodies at a peripheral speed of 15-20 m/sec. Flexible shafts, electric and air straight and angle grinders can be used as drive machines.

End mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Face angle: 12° Other dimensions - see attached catalog sheet Material: HSS Standard: CSN 222142 / DIN 845 / ISO 1641 / DIN 228 A Type N : Universal use. Suitable for materials up to 900 Mpa strength. Use in materials: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cast iron up to 240 HB Ord. number - series: 420940 and 421940

Symmetrical double-sided angled end mill Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS or HSSCo5 - depending on the selected variant Standard: ČSN 222250 / 22 2250, DIN847, ISO 6108 Cat. No. - series: 857070 and 857075V

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.