Metalworking tools

Three-edged / three-tooth end mill, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 W , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Automatic and structural steels up to 600MPa Aluminum and non-ferrous metals Order no. code - series: 110418 and 111418

Three-edged / three-tooth roughing end mill, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping, type WR Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Number of blades: 3 pcs. ( 3br. ) Helix angle: 35° Head angle: 18° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 K+L , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Automatic and structural steels up to 600MPa Aluminum and non-ferrous metals Type WR: For roughing materials with lower to medium strength. Order no. code: 114418 and 115418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 230418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8) : 2 mm Blade length l: 7mm Total length: 51mm Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 231418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 233418

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Other dimensions: see product description for individual variants Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

NC / CNC weldon clamp for clamping a cutter with a cylindrical shank and a securing surface for a screw Clamping cone: according to the selected variant Clamping diameter for cutter: according to the selected variant Length of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Usage: For machines with manual change Balance: G6.3/12000 rpm Standard: DIN 1835-B, JIS 6339 B, MAS BT - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Front end mill with morse taper Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Helix angle: 35° Material: HSS Standard: CSN 222142 / 420940 Extraordinary supply

Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle: 55° Material: CS - Carbon tool Steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: 2A Top angle: 60 ° Material: CS - Carbon Tool Steel Standard: DIN EN22568, ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Circular thread dies Thread type: UNF - Unified Fine - American inch thread with fine pitch Climb: in numbers of strokes per inch; UNF - gentle climb Thread tolerance - fitting: 2A Top angle: 60 ° Material: CS - Carbon tool Steel Standard: DIN EN22568, ANSI ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

Abrasive diamond paste in a syringe Grain: according to the selected variant Weight of the paste: 5g The color of the paste is only the color of the binder - it may vary according to the manufacturer, the abrasive is colorless. Usage - see attached photo - table. Diamond polishing and lapping pastes consist of diamond powder and a binder that has a lubricating and cooling effect. The use of diamond pastes instead of abrasives makes it possible to increase the lapping speed by 2-5 times and thus improve the cleanliness of the machined surface. We recommend using diamond paste for lapping and polishing cemented carbides, ceramics, quartz and other harder materials. In the production of gauges, pressing molds, microgrinding of components, heating devices. They are used in the engineering industry for various types of materials for finishing operations of functional surfaces of tools, finishing grinding of molds, pressing tools, molds and nozzles, lapping tappets and valve seats, lapping very precise parts of hydraulic, pneumatic and fuel systems. Polishing metal parts, but can also be used to polish stone and semi-precious stones. Diamond pastes are washable with water or organic solvents: * Kerosene, petrol, low-viscosity mineral oils, alcohol and others can be used as organic solvents. * Water-washable pastes are recommended for machining non-metallic materials. * Universal pastes are suitable for machining both metallic and non-metallic materials.