Metalworking tools

Blade sharpening stone Size: according to the selected variant Grain: according to the selected variant Abrasive type: 49C - green silicon carbide, ceramic binder For manual sanding, removing burrs and grooves Recommended use: steel up to 67 HRC, stainless steel, hard metal, cast iron Possible use: steel class 11, steel up to 55HRC

Internal replaceable blade thread insert 22 IR M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge): 4.71mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Carbide replaceable milling insert for trapezoidal thread - DIN103 Size: according to the selected variant Profile: full Suitable for internal trapezoidal thread with a rise: according to the selected variant Other dimensions - see the attached catalog sheet Material: MT7 - submicron substrate K10-K20 with TiAlN multilayer coating. Usage: universal

Internal replaceable cutting edge threaded insert 22 IL M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: left Height (to edge) : 4.71mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Blade sharpening stone Size: according to the selected variant Grain: according to the selected variant Abrasive type: 99A - white artificial corundum, ceramic binder, red-brown color For manual sanding, removing burrs and grooves Recommended use: steel class 11, steel up to 55 HRC Possible use: stainless steel

Corner turning knife with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223723 / CSN 22 3723, DIN4978, DIN 4978L, ISO13 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Corner turning knife with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223723 / CSN 22 3723, DIN4978, DIN 4978L, ISO13 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Square holder for mini / micro carbide boring knives (without internal cooling) For diameters: according to the selected variant Clamping dimension of the holder: according to the selected variant Other dimensions - see the attached catalog sheet The carbide micro knife is not included in the price of the holder.

Circular tube thread dies Thread type: tubular inch thread Pitch: in numbers of strokes per inch Top angle: 55 ° Tolerance: class A Material: HSSE - High Speed Steel + Co5 + Vanadium Dimensions - see attached catalog sheet Standard: ČSN EN 24231, DIN ISO 228, ČSN 223212

Abrasive disc for stand/machine sander, type 96A Diameter: according to the selected variant Disc width: according to the selected variant Clamping diameter: according to the selected variant Grain: according to the selected variant Hardness: according to the selected variant Disc structure: according to the selected variant Binder type: V (ceramic) Revolutions: 40 (i.e. 40 m/s) * You can find more about the hardness and structure in the attached disc marking table. Abrasive type: 96A - artificial brown corundum (grey color), ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC

Grinding revitalizing stone square (rectangular cross-section), file 90AS Size: according to the selected variant Grain: according to the selected variant Abrasive type: 99BA, artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, cast iron Suitable for reviving the functional layer of DIA and CBN wheels

DGN 1402J Interchangeable Feeder 140mm For DGN 1402 Interchangeable Plates A socket replacement key is supplied with the goods. Ref. No .: 2301381