Metalworking tools

Abrasive disc for stand/machine sander, type 99BA Diameter: according to the selected variant Disc width: according to the selected variant Clamping diameter: according to the selected variant Grain: according to the selected variant Hardness: according to the selected variant Disc structure: according to the selected variant Binder type: V (ceramic) Revolutions: 40 (i.e. 40 m/s) * You can find more about the hardness and structure in the attached disc marking table. Abrasive type: 99BA - artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron

Grinding stone, two grain sizes Size: according to the selected variant Grain: according to the selected variant Abrasive type: 49C - green silicon carbide, ceramic binder For manual sanding, removing burrs and grooves Recommended use: steel up to 67 HRC, stainless steel, hard metal, cast iron Possible use: steel class 11, steel up to 55HRC

Grinding stone, two grain sizes Size: according to the selected variant Grain: according to the selected variant Abrasive type: 99A - white silicon carbide, ceramic binder For manual sanding, removing burrs and grooves Recommended use: steel grade 11 Possible use: steel up to 55HRC, cast iron

Clamping cone: according to the selected variant Fine adjustment of the bore diameter (nonius) Boring range: 10-100mm Head diameter: 50mm Clamping holes for knives: 12mm Division: 0.01mm Nonius: 1 turn = 0.5mm Maximum extension - offset: 15mm Distance between front holes: 15mm Total height: 60mm Front circling: max dia. 70mm Side circling: min dia. 55mm

Automatic boring head - with autofeed Clamping cone: according to the selected variant Boring range: 5 - 250mm Max. displacement: +-15mm Clamping diameter of knives: 18mm Transition scale: 0.005mm Max. feed / turn: 3mm Automatic shift / rotation: 0.02; 0.04; 0.06 mm Inserts for knives: 10mm, 12mm Radeco knife: 6x6x30mm Dimensions: 85x45x80 mm

End mill, double-edged, double-toothed Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Helix angle 25° Face angle 10° Other dimensions - see the attached catalog sheet Material: HSSE-PM Coating: TiAlN (Tital Aluminum Nitride) Standard: DIN 1889 Cat. number 510417.040

Angle milling head for chamfering edges AKKO MAKINA for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant - type ODMT 0605 Angle: 43° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Multi-row cutter / "corn" for exchangeable cutting inserts Diameter: according to the selected variant Working length: according to the selected variant Total length: according to the selected variant Total number of plates for installation: according to the selected variant Other dimensions - see the attached catalog sheet Type of VBD : 1) APKT 1003 The packaging is without VBD

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.