Metalworking tools

Hand tap W 3/8 ", third of set Angle: 16 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/16 ", the first of the set Angle: 18 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/8 ", the first of the set Angle: 11 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/8 ", the other from the set Grip: 11 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand Tap W 5/8 ", Third of Set Glide: 11 Strokes per inch, Basic Face: Medium Material: NO - Tool Steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/8 ", the first of the set, the tap is longer - length 90mm Grip: 11 strokes per inch, basic Face: medium Material: NO - Tool steel PN 8/3011 -

Hand tap W 7/16 ", second from set Angle: 14 strokes per inch, basic Face: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 7/16 ", third of set Angle: 14 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 7/8 ", the first of sets Climbing: 9 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or for piece thread cutting.

Hand Tap W 7/8 ", Third of Set Angle: 9 Strokes per inch, Basic Face: Medium Material: NO - Tool Steel PN 8/3011 Taps from NO are suitable for threading or for piece thread cutting.

Reducing insert - reduction for milling machine through short, ISO50/MK5, ISO50/5 Outer steep taper ISO50 Inner steep taper morse 5 Total length: 150mm For tools - milling cutters or other reduction bushings with MK5 cone Standard: old Czech milling reduction - custom production 19xx, predecessor of ČSN 241481 Also applicable for DIN2080 - manual tool change (through reduction)

Front clamping fixed tip, tip with front edges / teeth Clamping range: 6-16mm Length of the front cylindrical part: 22mm Morse taper: 3 Total length: 114mm Enterprise standard, designation DTR 41284