Metalworking tools

Flatted fixed clamping point MK 3 with a peak angle of 60°. Diameter of the cylindrical part: 22 mm Length of the cylindrical part: 90 mm Total length: 180 mm Standard: -

Flatted fixed clamping point MK 3 with a peak angle of 60°. Diameter of the cylindrical part: 24 mm Length of the cylindrical part: 30 mm Total length: 125 mm Standard: -

Threaded eye left with jaw / threaded eye with jaws Size M 2,3 mm Gradient: 0,4, ie basic M2,3x0,4 LH (2,3x0,4 LH) Tolerance: 6g Metric thread left Outer loop diameter: 16mm CSN EN 22 568 / CSN EN 22568 (CSN 22 3210 / CSN 223210) - Material: HSS - High-speed steel

Threaded eye left with jaw / threaded eye with jaws Size M 3 mm Gradient: 0,5 , ie basic M3x0,5 LH (3x0,5 LH) Tolerance: 6g Metric thread left Ejector outer diameter: 20mm CSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210) - Material: NO - Tool steel

Left threaded eyelet with jaw / threaded eyelet with jaws Size M 5 mm Pitch: 0.8, i.e. basic M 5x0.8 LH Tolerance: 6g Metric thread left br>Outer eye diameter: 20mm Standard: ČSN EN 22 568 / CSN EN 22568 ( Ä^SN 22 3210 / CSN 223210 ) Material: NO - Tool Steel

Threaded eye left with jaw / threaded eye with jaws Size M 11 mm Grip: 1,5, ie basic M11x1,5 LH (11x1,5 LH) Tolerance: 6g Metric thread left Ejector outer diameter: 30mm EN 22 568 / CSN EN 22568 (CS 223210 / CSN 223210) - Material: NO -

Threaded eye with jaw / threaded eye with jaws Size W 3/32" Pitch : 48 z/1" Outer diameter : 20mm Whitworth thread - BSW (British Standar Whitworth) Standard: PN 8/3211 , ČSN 223211 / CSN 22 3211 Material: NO - Tool Steel From above-standard stocks ( stamp. ZONA, SIGMA, ŠKODA, etc.) Unused or only slightly used.

Replacement outer cover sleeve / mica for SH9801 hood from our offer Width 115mm Height 134mm Strength 1mm

Hand Tap W 1 1/2 ", Set Angle: 6 Strokes per inch, Basic Face: Medium Material: NO - Tool Steel PN 8/3011 Taps from NO are suitable for threading or for piece thread cutting. -

Hand tap W 1/2 ", the first of the set Climbing: 12 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 1/2 ", the other from the set Gliding: 12 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 1/2 ", third from set Gap: 12 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.