Metalworking tools

Turning knife straight smoothing with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223720 / CSN 22 3720, DIN4975, DIN 4975R, ISO10 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Holder for mini / micro carbide boring knives / tool bars For diameters: according to the chosen variant Clamping diameter of the holder: according to the selected variant Overall length of the holder: 90mm The holder has an Allen screw on the back, which can be used to adjust the stop of the knife. Carbide micro knife is not included in the price of the holder.

Holder for round radeco knives - turning knives with cylindrical shank Clamping diameter (radeco): according to the selected variant Clamping dimensions of the holder: according to the selected variant The holder is double-sided, secured with Allen screws The screws are hidden after tightening. Other dimensions - see product description for individual variants

Hand reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSS Standard: ČSN 221420 / CSN 22 1420 / DIN 206 Form B (ISO 236) Application: Reaming of through holes in repairs and piece production for all non-ferrous and ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

Countersink with guide pin for countersunk screws (for countersunk screws) Diameter of countersink x Diameter of guide pin: according to selected variant Clamping shank: cylindrical or with Morse taper - according to the selected variant Material: HSS Standard: ČSN 22 1620 / CSN 22 1620 Use for countersinking holes for 90 ° countersunk screws in common materials.

Clamp - holder for Karnasch core drills, screw type Morse taper: according to the selected variant For clamping shanks: according to the selected variant The drill is clamped in the head over screws. Without internal cooling

Clamp - holder for Karnasch core drills, screw type with internal cooling Morse cone: according to the selected variant For clamping shanks: according to the selected variant Length of the clamping device: according to the selected variant The drill is clamped in the head via screws. With internal cooling

Morse clamping tip - for wood, plastic, etc. Diameter of the driving part: according to the selected variant Other dimensions - see descriptions of individual variants To clamp the workpiece between the centers, it is clamped to the lathe spindle directly or via a reduction sleeve. A rotating tip is suitable for the tailstock quill. Before clamping the workpiece, it is necessary to first drill centering holes in the workpiece. Body and tip are made of SLD steel, HRC 62 °

Double-edged grooving cutter with asymmetrical edges with cylindrical shank Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 25° Head angle: 12° Standard: DIN 1835 A / DIN1835B, DIN 327, ISO 1641, ČSN 222192.1 (CSN 22 2192 / 22 2192.1) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 220408 and 220418

Double-edged grooving cutter with asymmetrical edges with cylindrical shank Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 2 pcs. ( 2 pcs. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 25° Head angle: 12° Standard: DIN 1835 A / DIN 1835 B , DIN 327 , ISO 1641 , ČSN 222192.1 ( CSN 22 2192 / 22 2192.1) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 221408 and 221418

End mill, double-edged, double-toothed Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Helix angle: 25° Head angle: 10° Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: DIN 1889 Cat. number - series: 510418 and 511418

Face and corner cutter / holder for exchangeable cutting inserts Diameter: according to the selected variant Total length: according to the selected variant Type of VBD: according to the selected variant, see also product description for individual variants Angle: 90° The packaging is without VBD AKKO MAKINA milling cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.